検索結果

トップページ

オンラインヘルプ

HVTR-BCTZ シリーズ、HVTR-T3HDZ シリーズ

録画テレビチューナー

設置方法および初回設定については「セットアップガイド」をご覧ください。

右上の[マニュアル内検索]もご利用ください

このガイド内の用語を指定して検索することができます。

商標について

TiVo、Gガイド、G-GUIDE、およびGガイドロゴは、米国TiVo Brands LLC および/またはその関連会社の日本国内における商標または登録商標です。Gガイドは、米国Xperi Inc. および/またはその関連会社のライセンスに基づいて生産しております。 米国Xperi Inc. およびその関連会社は、Gガイドが供給する放送番組内容および番組スケジュール情報の精度に関しては、いかなる責任も負いません。また、Gガイドに関連する情報・機器・サービスの提供または使用に関わるいかなる損害、損失に対しても責任を負いません。Gガイドが供給する画像は、各著作権者に帰属します。Gガイドの利用以外の目的でそれらの画像をダウンロードすることは制限されています。また、再出版、再送信、複製、その他の用法は禁止されています。

テレビで見る

テレビ等と本製品をHDMIケーブルで接続している場合に、放送中の番組を見る手順を説明します。

参考

・スマホ/タブレット等で「REC-ON App」で使う場合は、「REC-ON Appで楽しむ」をご覧ください。

・Android TVと本製品をHDMIで接続して使う場合は、本手順をご覧ください。「REC-ON App」で使う場合は、「REC-ON Appで楽しむ」をご覧ください。

テレビで見る(基本操作)

番組表から選ぶ

見ている番組を録画する

テレビで見る(基本操作)

  1. [電源]を押し、本製品の電源を入れる

  2. テレビの電源を入れる

  3. テレビの入力を[HDMI]に切り換える
    ⇒本製品の映像がテレビに表示されます。

  4. チャンネルを選ぶ

    ① [放送切換]で放送波を選ぶ

    ② [チャンネル]またはでチャンネルを選ぶ

    データ放送を見る場合

    ① [サブメニュー]を押す

    ② [データ放送]を選び、[決定]を押す
    ⇒データ放送が表示されます。データ放送を消す場合は、同じ手順で[データ放送]を選んでください。

番組表から選ぶ

※ 番組表はGガイドを使用しています。

  1. [番組表]を押す
    ⇒番組表が表示されます。

  2. [放送切換]で放送波を選ぶ

  3. 現在放送中の番組を選び、[決定]を押す

  4. [見る]を選び、[決定]を押す ⇒番組が表示されます。

    ※ 番組表を表示中に[青]ボタンを押して視聴することもできます。

見ている番組を録画する

USB HDD/SSD に録画する場合は、以下の手順で録画することができます。

※ ネットワーク HDD(NAS)に録画する場合は、「番組表(Gガイド)から予約する」をご覧ください。

  1. 視聴中に[録画]を押す
    ⇒録画を開始します。

  2. 番組が終わると、自動で録画を停止します。

    ※ 自動で録画を停止させないようにするには、以下の設定をおこなってください。 この設定をしておくと、15時間まで録画できます。 [ホーム]ボタン→[本体設定]→[本体設定]→[録画設定]→[番組終了時の録画停止]の順に選び、[しない]を選ぶ

途中で録画を停止する方法

「録画を途中で停止する」参照

録画モードを変更する方法

録画する前に以下の設定をしてください。

① [サブメニュー]を押す

② [録画モード]を選び、[決定]を押す

③ お好みの設定を選び、[決定]を押す

※ 録画モードについては、「録画について」をご確認ください。

録画について

録画する場合は、USB HDD/SSD またはネットワーク HDD(NAS)を用意し、本製品に登録してください。

※ 「HVTR-T3HDZ シリーズ」には USB HDD/SSD が添付されています。

録画できる HDD/SSD を確認し、登録する

録画モードとは

録画できる HDD/SSD を確認し、登録する

▼ USB HDD/SSD とネットワーク HDD(NAS)の録画比較

USB HDD/SSDネットワーク HDD(NAS)※1,2
LAN DISKシリーズRECBOXシリーズ
接続方式USBLAN
最大容量8TB(無制限)
最大登録者数8台2台
1タイトル最大録画時間15時間
最大録画タイトル数5,000※3100,000

※1:録画するネットワーク HDD(NAS)に録画した番組は、ネットワーク HDD によっては外出先から再生できません。

※2:「ダビング10」(コピー9回+移動1回)の状態にはなりません。「移動1回だけ」の状態となります。持ち出し、他の機器へダビングしたい場合は USB HDD/SSD をご利用ください。

※3:USB HDD/SSD 1台あたりの最大録画タイトル数です。USB HDD/SSD を切り替えてお使いの際は、ハードディスクごとに最大5,000タイトルとなります。

▼ 動作確認済み機種
https://www.iodata.jp/pio/io/av/hvtrbctx.htm

▼ 用意した HDD/SSD を登録する

「USB HDD/SSD を登録する」参照

「ネットワーク HDD を登録する」参照

録画モードとは

録画モードとは、録画する番組の画質のことです。録画モードは、用途によって使い分けることができます。

画質録画モード説明倍率解像度
放送画質DR放送そのままの画質で録画します。標準放送波により異なります。
HD画質AF
AN
AS
AL
AE
高画質



長時間

放送データを圧縮し、ハイビジョン画質で録画します。
番組をきれいなまま長時間録画したいときにおすすめです。

約2倍
約3倍
約4倍
約5.5倍
約12倍
配信画質MR1
MR2
MR3
MR4
MR5
MR6
高画質



長時間

低画質で録画します。
スマホ/タブレットなどに配信したいときにおすすめです。

約3倍
約4倍
約6倍
約10倍
約17倍
1280x720
約28倍640×360

録画モードによって字幕の表示可否が異なります

DR
字幕すべて表示可能

AF~AE
字幕1つのみ表示可能

MR1~MR6
字幕表示不可

番組表(Gガイド)から予約する

番組表から録画予約する手順を説明します。

  1. [番組表]を押す
    ⇒番組表が表示されます。

  2. [放送切換]で放送波を選ぶ

  3. 録画したい番組を選び、[決定]を押す

  4. [録画予約]を選び、[決定]を押す

  5. 必要に応じて各項目を設定する

  6. [予約する]を選び、[決定]を押す

一発予約する方法(USB HDD/SSD のみ)

番組表から録画したい番組を選び、[録画]を押すとワンタッチで予約できます。

※ ネットワーク HDD には録画予約できません。

録画を途中で停止する

録画を途中で停止する手順を説明します。

  1. 録画中に[サブメニュー]を押す

  2. [停止操作]を選び、[決定]を押す

  3. [はい]を選び、[決定]を押す
    ⇒録画を停止します。

くり返し予約する

連続ドラマなどくり返し録画したいときは、以下の手順で設定します。

  1. [番組表]を押す
    ⇒番組表が表示されます。

  2. [放送切換]で放送波を選ぶ

  3. 録画したい番組を選び、[決定]を押す

  4. [くり返し録画]を押す

  5. [予約する]を選び、[決定]を押す

くり返し予約を確認する方法

予約リストにて確認することができます。

① [ホーム]を押す

② [予約リスト]を選び、[決定]を押す

③ [予約リスト]を選び、[決定]を押す
⇒予約した周期([毎週火]や[月~金]など)の表記がつきます。

番組を検索して予約する

キーワード、ジャンル、出演者で検索して予約することができます。
ここでは、出演者で検索して予約する例を説明します。

  1. [番組表]を押す
    ⇒番組表が表示されます。

  2. [サブメニュー]を押す

  3. [番組検索]を選び、[決定]を押す

  4. [検索方法]-[カテゴリー]を選び、[決定]を押す

  5. [出演者]を選び、[決定]を押す

  6. [出演者]-[指定なし]を選び、[決定]を押す

  7. 検索する出演者を選び、[決定]を押す

    例)

  8. 必要に応じて、日付と放送種別を設定する

  9. [検索開始]を選び、[決定]を押す
    ⇒検索が開始され、検索結果が表示されます。

  10. 録画したい番組を選び、[録画]を押す
    ⇒録画予約されます。

好みの番組を自動で予約する(おまかせ録画)

ジャンルやキーワード、チャンネルなどの条件を設定し、条件に合った番組を自動で録画できます。

ご注意

・ おまかせ録画は、録画を保証するものではありません。確実に録画予約したい番組は、番組表から予約してください。

・ おまかせ録画で録画予約できるのは2日先までです。

・ おまかせ録画で自動登録する番組は、1日の録画時間の合計が12時間までです。

※ 対象番組がすべて1時間の番組であれば、12番組を自動で予約します。

・ おまかせ録画の自動登録は、電源オフ時におこないます。チューナー本体の電源が入っている状態(電源ランプ:緑)のときは、電源をスタンバイ(電源ランプ:赤)に戻してください。

・ おまかせ録画に登録できる条件数は、21件までです。

  1. [ホーム]を押す

  2. [予約リスト]を選び、[決定]を押す

  3. [おまかせ録画]を選び、[決定]を押す

  4. [(未設定)]を選び、[決定]を押す

  5. 条件を設定する

    例)

  6. 各項目を設定する

    番組を自動削除する方法

    「自動削除」を[する]に設定すると、容量が少ないときに、おまかせ録画した番組を自動で削除することができます。

    ※ USB HDD/SSD の場合のみ。

  7. [設定完了]を選び、[決定]を押す
    ⇒設定した条件で番組を検索し、条件に合った番組が自動で予約されます。

おまかせ録画で予約した番組を確認する方法

予約リストにて確認することができます。

① [ホーム]を押す

② [予約リスト]を選び、[決定]を押す

③ [予約リスト]を選び、[決定]を押す
⇒[おまかせ]の表記がつきます。

日付を指定して予約する

日付と時刻を指定して録画予約する手順を説明します。

※ 録画先は USB HDD/SSD のみです

  1. [ホーム]を押す

  2. [予約リスト]を選び、[決定]を押す

  3. [予約リスト]を選び、[決定]を押す

  4. [サブメニュー]を押す

  5. [新規予約]を選び、[決定]を押す

  6. 録画日、開始時刻、終了時刻、チャンネルを設定する

  7. [決定]を選び、[決定]を押す

指定したチャンネルを録画し続ける(一括録画)

一括録画を設定すると、指定した1つのチャンネルの番組を録画し続けることができます。

ご注意

・ 一括録画は以下の数まで登録できます。
HVTR-BCTZ3、HVTR-T3HDZ シリーズ:3 チャンネル
HVTR-BCTZ2/E:2 チャンネル

・ 指定した1つのチャンネルを、4時間ごとに6時間先まで自動的に録画予約します。

・ 一括録画は、録画を保証するものではありません。確実に録画予約したい番組は、番組表から予約してください。

・ 録画先が USB HDD/SSD の場合、自動削除設定は「する」で固定です。

・ 一括録画を主に使用する場合、容量が大きい USB HDD/SSD をおすすめします。(1TB以上推奨)

・ 番組の自動削除は、電源オフ時におこないます。長時間電源オン状態で使用する場合は、USB HDD/SSD の残量により、番組途中で録画が終了する場合があります。

・ ネットワーク HDD に録画する場合、番組が自動削除されるかはご利用のネットワーク HDD によって異なります。

・ 時間帯は、1 ~23時間の範囲で設定できます。

※ 18時間以上設定する場合、Gガイド情報を収集できない可能性があり、各種番組情報を使用する機能が利用できなくなる場合があります。

・ 時間帯の範囲内の番組を録画予約します。開始時間、終了時間をまたぐ番組は予約しません。

  1. [ホーム]を押す

  2. [予約リスト]を選び、[決定]を押す

  3. [おまかせ録画]を選び、[決定]を押す

  4. [(未設定)]にカーソルを合わせる

  5. [青]を押す

  6. [詳細設定]を選び、[決定]を押す

  7. ① [チャンネル][時間帯]を設定する

    ※ [ジャンル][出演者][除外ワード]は設定しません。

    ② 設定が終わったら[決定]を選び、[決定]を押す

  8. 次に、放送局名のフォルダーを新規に作成し、保存先に指定します。保存先のフォルダーを指定することで、録画番組を探しやすくできます。

  9. [フォルダ設定]を選び、[決定]を押す

  10. [新規フォルダ]を選び、[決定]を押す

  11. [決定]を押す
    ⇒放送局名のフォルダーが新規作成され、保存先に指定されます。

  12. [設定完了]を選び、[決定]を押す
    ⇒設定した条件で番組を検索し、条件に合った番組が自動で予約されます。

番組の自動削除について

一括録画では容量が少ないときに、おまかせ録画した番組を自動で削除します。(録画先が USB HDD/SSD の場合のみ)

予約を確認、取り消し、修正する

  1. [ホーム]を押す

  2. [予約リスト]を選び、[決定]を押す

  3. [予約リスト]を選び、[決定]を押す

  4. 番組を選び、操作をおこなう

    取り消す

    ① [黄]を押す

    ② [はい]を選び、[決定]を押す

    修正する

    ① [サブメニュー]を押す

    ② [予約修正]を選び、[決定]を押す

    ③ 各項目を修正する

    ④ 修正が終わったら、[決定]を選び、[決定]を押す

    ※ ネットワーク HDD の場合、[予約修正]はできません。[番組説明]と[予約削除]のみ利用できます。

番組表から削除する方法

番組表で予約した番組を開きます。[予約取消]を選択し、[決定]を押します。

「おまかせ録画」によって自動で予約された番組を削除した場合

予約のみ削除されます。おまかせ録画設定は残ります。

録画についての補足説明

録画予約が重なったときは

録画先の USB HDD/SSD がいっぱいになった場合

ネットワーク HDD に録画する場合

その他

録画予約が重なったときは

録画予約を決定したときに、番組の一部またはすべてを録画できないことを知らせる確認画面が表示されます。

・ 録画先が USB HDD/SSD の場合、チューナー数を超えて重複予約を登録できます。

・ チューナー数を超えて重複予約をした場合の録画のされ方

■ 録画開始時刻の遅い予約が優先的に録画されます。

■ 録画開始時刻が同じときは、[予約リスト]画面で順番が下の予約が優先的に録画されます。

・ 本製品がネットワーク HDD に同時に録画できる番組数は、2番組までです。ただし、ネットワーク HDD 側の同時録画数が1番組までの場合、重複予約はできない場合があります。 ネットワーク HDD の同時録画数や、その数を超えた場合に重複予約できるかは、ご使用のネットワーク HDD によって異なります。

録画先の USB HDD/SSD がいっぱいになった場合

新規の録画はされません。不要な番組を削除してください。

・ 録画番組を削除したくない場合は、対応 USB HDD/SSD を追加して登録してください。詳しい手順は「USB HDD/SSD を登録する」をご確認ください。

ネットワーク HDD に録画する場合

以下の点にご注意ください。

・ 時間が連続した番組の録画予約をおこなう場合、前の録画番組の後端や、後の録画番組の冒頭に未録画時間が発生する場合があります。

・ 録画予約する際、録画開始時にネットワーク HDDが見つからない場合は、代わりに USB HDD/SSD に録画します。(USB HDD/SSD が接続されてない場合は、録画されません。)
また録画中にネットワーク HDDが見つからなくなった場合は、途中で録画を停止します。

・ 録画した番組の情報について

■ 年齢制限の管理情報は、すべての情報が記録されるわけではありません。再生機器により番組名が表示されたり、再生が可能になったりする場合があります。

■ チャプター情報や、ジャンル情報が記録されない場合があります。

・ 「ダビング10」(コピー9回+移動1回)の状態にはなりません。「移動1回だけ」の状態となります。

その他

以下の点にご注意ください。

・ 天候不良やその他要素によるアンテナ受信感度の低下などにより、録画に失敗する可能性があります。

・ 録画した番組のデータ放送は表示できません。

・ USB HDD/SSD へ録画した番組を再生するには、録画時に使っていた本商品と HDD/SSD が必要です。そのため、商品を交換した場合は、交換前の商品で録画された番組は再生できません。

・ ネットワーク HDD に録画した番組は、本製品がなくても再生できます。詳細は、ネットワーク HDD の商品仕様をご確認ください。

テレビで再生する

再生する(基本操作)

再生中の操作

録画リスト画面について

参考

・スマホ/タブレット等で「REC-ON App」で使う場合は、「REC-ON Appで楽しむ」をご覧ください。

・Android TVと本製品をHDMIで接続して使う場合は、本手順をご覧ください。「REC-ON App」で使う場合は、「REC-ON Appで楽しむ」をご覧ください。

再生する(基本操作)

  1. [録画リスト]を押す

  2. 録画先を選ぶ(xは英数字)

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

    USB HDD/SSD の場合

    ① [USBx:xxxx]を選び、[決定]を押す

    ネットワーク HDD の場合

    ① [ネットワーク HDDx]を選び、[決定]を押す

    ② 録画番組が保存されているフォルダーを開く
    「RECBOX」の場合:[フォルダー]→[dlna]→[録画]フォルダーを開く

    ※ ご利用のネットワーク HDD により、フォルダー名が異なります。

  3. 番組を選び、[決定]を押す

  4. ⇒ 再生が始まります。
    停止する場合は[戻る]または[録画リスト]を押します。

    録画先のフォルダーを一覧表示する方法

    (左◀ボタン)または[緑]を押します。

再生中の操作

一時停止

[決定]を押すと、一時停止します。

もう一度、[決定]を押すと、再生を再開します。

停止(録画リストに戻る)

[戻る]または[録画リスト]を押します。

早送り/早戻し

(左◀または右▶ボタン)を押します。

※ 押すたびに速さが切り換わります。(最大で4段階)
USB HDD/SSD の場合、1段階目の早送りは音声が出ます。(早見再生)
ネットワーク HDD の場合、最大で3段階です。

チャプター移動

[前]または[次]を押します。

※ 前のチャプターの先頭に戻るときは、[前]を2回続けて押します。

30秒送り/10秒戻し

[スキップ]を押すと30秒送ります。

[スキップ]を押すと10秒戻します。

※ スキップする時間は変更することができます。「本体の設定を変更する」を参照し、[再生設定]内の[可変スキップ]と[可変リプレイ]で設定できます。

コマ送り/コマ戻し

一時停止中に[前]または[次]を押します。

※ ネットワーク HDD の場合、コマ戻しは非対応です。

正スロー/逆スロー

一時停止中に(左◀または右▶ボタン)を押します。

※ USB HDD/SSD の場合、正スローは3段階、逆スローは録画モードがDRのときは3段階、DR以外のときは2段階です。
ネットワーク HDD の場合、正スローは3段階、逆スロー1段階です。

録画リスト画面について

選択中の番組の再生画面

容量不足時に自動削除される番組

USB HDD/SSD名/フォルダー名(ネットワーク HDD の場合は、現在のフォルダー名)

現在の録画モードでの残量

操作ガイド

フォルダ一覧

番組削除

スキップ10ページ切換

チャンネルページ切換

決定再生

サブメニューサブメニューを表示

▼番組のアイコン

未視聴の番組

未視聴かつ、おまかせ録画で録画された番組

未視聴かつ、保護された番組

おまかせ録画で録画された番組

保護された番組

録画中の番組

別の部屋のテレビで再生する

本製品で録画した番組を別の部屋のテレビで再生することができます。再生方法は以下の二通りあります。

Android TVでREC-ON Appを使い再生する

DTCP-IP対応DLNA再生機能搭載テレビで再生する

Android TVでREC-ON Appを使い再生する

本製品とAndroid TVを同じルーターに接続してください。アプリのインストール方法等については「アプリをインストールしてTVを見る」をご参照ください。

DTCP-IP対応DLNA再生機能搭載テレビで再生する

本製品で録画した番組を、別の部屋のDTCP-IP対応DLNA再生機能搭載テレビで再生することができます。
再生する手順は、お使いのDLNAの再生機能対応テレビの取扱説明書をご確認ください。

再生するテレビについて

・DTCP-IP対応DLNAの再生機能に対応している必要があります。

・本製品と同じルーターにつないでください。

※ すべてのDLNAの再生機能対応テレビでの動作を保証するものではありません。また、すべての録画番組の再生を保証するものではありません。

番組を削除する

ご注意

削除した番組は元に戻せません。

番組を1つだけ削除する

複数の番組をまとめて削除する(USB HDD/SSD のみ)

番組を1つだけ削除する

  1. [録画リスト]を押す

  2. 録画先を選ぶ(xは英数字)

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

    USB HDD/SSD の場合

    ① [USBx:xxxx]を選び、[決定]を押す

    ネットワーク HDD の場合

    ① [ネットワーク HDDx]を選び、[決定]を押す

    ② 録画番組が保存されているフォルダーを開く
    「RECBOX」の場合:[フォルダー]→[dlna]→[録画]フォルダーを開く

    ※ ご利用のネットワーク HDD により、フォルダー名が異なります。

  3. 削除する番組を選び、[黄]を押す

  4. [はい]を選び、[決定]を押す

複数の番組をまとめて削除する(USB HDD/SSD のみ)

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. [サブメニュー]を押し、[番組削除(複数)]を選び、[決定]を押す

  4. 番組を選び終えたら[決定]を選び、[決定]を押す

  5. [はい] を選び、[決定]を押す

削除できないように保護する

※ 本操作は USB HDD/SSD のみおこなえます。ネットワーク HDDでは操作できません。

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. 保護する番組を選び、[サブメニュー]を押す

  4. [番組編集]を選び、[決定]を押す

  5. [番組保護]を選び、[決定]を押す

  6. [はい]を選び、[決定]を押す

  7. ※ 保護を解除する際は、手順5で[番組保護解除]を選んでください。

番組名を変更する

※ 本操作は USB HDD/SSD のみおこなえます。ネットワーク HDDでは操作できません。

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. 編集する番組を選び、[サブメニュー]を押す

  4. [番組編集]を選び、[決定]を押す

  5. [番組名変更]を選び、[決定]を押す

  6. 番組名を入力し、[決定]を押す

  7. [はい]を選び、[決定]を押す

チャプターを編集する

番組のチャプターを好みに合わせて編集できます。また、不要な場面の削除に利用できます。

※ 本操作は USB HDD/SSD のみおこなえます。ネットワーク HDDでは操作できません。

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. 編集する番組を選び、[サブメニュー]を押す

  4. [番組編集]を選び、[決定]を押す

  5. [チャプター編集]を選び、[決定]を押す

  6. チャプターを編集する

    分割する

    すべてのチャプターを結合する

    前後のチャプターを結合する

    削除する(選択した映像を削除する)

  7. 編集が終わったら[戻る]を選び、[決定]を押す

分割する

選択した位置にチャプターを設定し、映像を分割します。

  1. [チャプター分割]を選ぶ

  2. [青]を押し、映像を再生する

  3. 映像を分割したいところで[青]を押す(一時停止する)

  4. [決定]を押す

  5. 他にも分割したい箇所がある場合は、手順2~4を繰り返す

すべてのチャプターを結合する

すべてのチャプター位置を削除し、1つの映像に統合します。

  1. [全チャプター結合]を選び、[決定]を押す

  2. [はい]を選び、[決定]を押す

前後のチャプターを結合する

選択したチャプターの前後にある映像(セクション)を統合します。

  1. [チャプター結合]を選ぶ

  2. 再生中の場合は、[青]を押す(一時停止する)

  3. [緑]または[黄]でチャプターの境界に位置を合わせる

  4. [決定]を押す

削除する(選択した映像を削除する)

選択したチャプターの映像(セクション)を削除します。

※チャプター分割位置を削除したい場合は「前後のチャプターを結合する」の手順をおこなってください。

削除した場面(セクション)は元には戻りません。ご注意ください。

  1. [チャプター削除]を選び、[決定]を押す

  2. [青]を押し、映像を再生する

  3. 削除したい場面が含まれるチャプター位置まで再生し、[青]を押す(一時停止する)

  4. [決定]を押す

  5. [はい]を選び、[決定]を押す

番組を2つに分割する

1つの番組を2つに分割する手順を説明します。

※ 本操作は USB HDD/SSD のみおこなえます。ネットワーク HDDでは操作できません。

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. 分割する番組を選び、[サブメニュー]を押す

  4. [番組編集]を選び、[決定]を押す

  5. [番組分割]を選び、[決定]を押す

  6. 分割する場面まで再生し、[青]を押す(一時停止する)

  7. [決定]を押す

  8. [はい]を選び、[決定]を押す

2つの番組を結合する

2つの番組を1つに結合する手順を説明します。

※ 本操作は USB HDD/SSD のみおこなえます。ネットワーク HDDでは操作できません。

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. 結合する番組を選び、[サブメニュー]を押す

  4. [番組編集]を選び、[決定]を押す

  5. [番組結合]を選び、[決定]を押す

  6. 結合する番組を選び、[決定]を押す

  7. [はい]を選び、[決定]を押す

録画モード[DR]で録画した番組を結合する方法

録画モードを[DR]で録画した番組と、[DR 以外]で録画した番組はそのままでは結合できません。[DR]で録画した番組の録画モードを変換し、変換が完了してから結合してください。(「録画モードを変換する]参照)

録画モードを変換する

録画モードを変換すると、USB HDD/SSD の容量を抑えることができます。

※ 本操作は USB HDD/SSD のみおこなえます。ネットワーク HDDでは操作できません。

録画モードの変換について

・録画モードを変換すると、変換する前と比べて画質は劣化します。

・HDD/SSD の空き容量が少ない場合、録画モードを変換できないことがあります。容量が少ないときは不要な番組を削除するなどして空き容量を増やしてください。

・保護された番組や録画中の番組は変換できません。

・録画モード変換中に電源を「入」にすると変換が中止されます。もう一度電源を「切」にすると変換が始まります。

・以下の場合、本機の電源を「切」にしていても録画モードは変換されません。

■ 「瞬速起動」の設定時間中

■ 録画予約準備中、および録画予約実行中

■ ソフトウェアの更新中

■ その他、配信の状態などにより、録画モードの変換が開始されない場合があります。

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. 録画モードを変換する番組を選び、[サブメニュー]を押す

  4. [録画モード変換]を選び、[決定]を押す

  5. 変換後の録画モードを選び、[決定]を押す

    変換の設定を取り消したい場合

    手順4の画面で[録画モード変換]を選び、[変換を取り消す]を選びます。[決定]を押します。

  6. ⇒録画モードの表記が[変換予定]に変わります。本製品の電源を「切」の状態にすると、自動的に変換されます。

モード変換が完了しているか確認する方法

  1. [録画リスト]を押す

  2. [USBx:xxxx]を選び、[決定]を押す

    ※ 録画先が1つしかない場合は選択画面は表示されません。次の手順へお進みください。

  3. 番組を選び、録画モードを確認する

USB HDD/SSD ⇒ ネットワーク HDD 間のダビング

USB HDD/SSD に録画した番組をネットワーク HDD にダビングすることができます。

ご注意

・ 年齢制限の情報はすべて記録されるわけではありません。そのため再生機器によっては年齢制限を設定していても、番組名が表示されたり、再生できる場合があります。

・ チャプター情報や、ジャンル情報が引き継がれない場合があります。

・ ダビング中、録画リストの確認や録画した番組の再生、録画の操作はおこなえません。

・ ダビング元の番組は、コピー可能回数が1回減ります。

・ ネットワーク HDDからUSB HDD/SSD にはダビングできません。

  1. [ホーム]を押す

  2. [HDD 設定]を選び、[決定]を押す

  3. [ダビング]を選び、[決定]を押す

  4. ダビング元の[USBx:xxxx]を選び、[決定]を押す

  5. ダビング先の[ネットワーク HDDx]を選び、[決定]を押す

  6. ダビングする番組を選び、[決定]を押す

    ※ 複数の番組を選べます。

  7. 番組を選び終えたら、[決定]を選び、[決定]を押す

  8. [決定]を選び、[決定]を押す

  9. [ダビング開始]を選び、[決定]を押す

    ⇒ダビングが開始され、放送画面に戻ります。

ご注意:ダビング中は、本製品、USB HDD/SSD、ネットワーク HDD の電源コードを抜かないでください。故障や番組の消失の原因になります

ご注意:ダビング中の操作制限について

ダビング中は、以下の操作ができません。

・録画番組の編集(録画モード変換、番組編集(番組名変更、チャプター編集、番組分割、番組結合、番組保護)、番組削除)

・ HDD 設定

・ 本体設定(一部設定可能)

USB HDD/SSD ⇔ USB HDD/SSD 間のダビング

本製品に USBハブを使い複数の USB HDD/SSD をつないでいる場合、USB HDD/SSD に録画した番組をもう一台の USB HDD/SSD にダビングすることができます。

ご注意

・ 本機能は本製品で録画した番組をもう一台の USB HDD/SSD にダビングする機能です。他の弊社製テレビチューナーで使用していたUSB HDD/SSD の録画番組は、本手順ではダビングできません。「HDD のお引越しをする(LANダビング)」を参照してください。

・ 年齢制限の情報はすべて記録されるわけではありません。そのため再生機器によっては年齢制限を設定していても、番組名が表示されたり、再生できる場合があります。

・ チャプター情報や、ジャンル情報が引き継がれない場合があります。

・ ダビング中、TV視聴以外の操作はおこなわないでください。

・ ダビング元の番組は、コピー可能回数が1回減ります。

・ ダビングは本製品の電源オフ時の未使用時間におこないます。

・ バスパワー駆動の HDD や SSD をつないでいる場合、当社製 USB-ACADP5R が必要になります。

・ 本操作は本製品に登録しているUSB HDD/SSD同士でのみおこなえます。(「USB HDD/SSD を登録する」参照)

  1. [ホーム]を押す

  2. [HDD 設定]を選び、[決定]を押す

  3. [ダビング]を選び、[決定]を押す

  4. ダビング元の[USBx:xxxx]を選び、[決定]を押す

  5. ダビング先の[USBx:xxxx]を選び、[決定]を押す

  6. [ダビングする]または[移動する]を選び、[決定]を押す

  7. ダビングする番組を選び、[決定]を押す

    ※ 複数の番組を選べます。

  8. 番組を選び終えたら、画面右フレームの選択肢から[決定]を選び、[決定]を押す

  9. 画面右フレームの選択肢から[決定]を選び、[決定]を押す

  10. [ダビング開始]を選び、[決定]を押す

    ⇒ダビングが開始され、放送画面に戻ります。

ご注意:ダビング中は、本製品、USB HDD/SSD、ネットワーク HDD の電源コードを抜かないでください。故障や番組の消失の原因になります

ご注意:ダビング中の操作制限について

ダビング中は、以下の操作ができません。

・録画番組の編集(録画モード変換、番組編集(番組名変更、チャプター編集、番組分割、番組結合、番組保護)、番組削除)

・ HDD 設定

・ 本体設定(一部設定可能)

HDD/SSD のお引越しをする(LANダビング)

他の弊社製録画テレビチューナーで使用していたUSB HDD/SSD に入っている録画番組を、本製品につないだUSB HDD/SSD にお引越しすることができます。(LANダビング機能)

・ お引越し対象はすべての番組、または保護されている番組、または保護されていない番組のいずれかを選択します。録画番組を個別に選んでお引越しすることはできません。

※ 録画番組を個別に選んでお引越ししたい場合は、「困ったときには」を参照してください。

・ お引越し元に対応している弊社製録画テレビチューナーは以下の機種です。

■ HVTR-BCTZ シリーズ(HVTR-BCTZ3, HVTR-BCTZ2/E)

■ HVTR-T3HDZ シリーズ(HVTR-T3HDZ1T, HVTR-T3HDZ2T)

■ HVTR-BCTX シリーズ(HVTR-BCTX3, EX-BCTX2)

■ HVTR-T3HDT シリーズ(HVTR-T3HD1、HVTR-T3HD2、HVTR-T3HD4、HVTR-T3HD1T、HVTR-T3HD2T、HVTR-T3HD4/E)

■ GV-NTX シリーズ(GV-NTX2, GV-NTX1, GV-NTX1A)

・ お引越し元の録画テレビチューナーと本製品は同じルーターに接続してください。

・ お引越し先の USB HDD/SSD が次の場合にはお引越しできません。

■ フォルダー数が最大数(99)に達している

■ 録画番組数が最大数(5000)に達している

・ お引越し元の録画テレビチューナーおよび本製品のソフトウェア(ファームウェア)は最新にしておいてください。

・ お引越し元の番組は、コピー可能回数が1回減ります。

・ お引越し元の録画テレビチューナーは、ネットワークに接続したままにし、電源オフにしておいてください。

・ お引越しは本製品の電源オフ時の未使用時間におこないます。

  1. [ホーム]を押す

  2. [HDD 設定]を選び、[決定]を押す

  3. [HDD のお引越し]を選び、[決定]を押す

    ⇒お引越し元に対応している録画テレビチューナーの検索がはじまります。録画テレビチューナーが表示されるまでしばらくお待ちください。

  4. お引越し元の[USBx:xxxx]を選び、[決定]を押す

    ⇒対象の録画番組の検索がはじまります。次の画面が表示されるまでしばらくお待ちください。

  5. お引越し対象(すべての録画番組/保護されている番組/保護されていない番組)を選び、[決定]を押す

  6. ① お引越し先フォルダ名を確認する

    ② [HDD 引越しを設定する]を選び、[決定]を押す

  7. 「HDD お引越しを設定しました。」と表示されたら[決定]を押す

    LANダビングは以下の条件のときに自動的に開始します

    LANダビング実行中に以下の条件が一つでも成り立たなくなったとき、一旦LANダビングを中断します。また条件がそろったときに引き続き実行されます。

    ・ お引越し元、お引越し先の録画テレビチューナーにおいて視聴、録画、番組再生が実行されておらず、スタンバイ状態で未使用時

    ・ 録画モード変換、持ち出し変換がない時

    お引越し状況の確認方法

    録画リストを開き、お引越し先フォルダーを開きます。番組情報に「引越し予定」と表示されているものは、まだ引越しされていません。また引越しが終わるまで再生することはできません。

ご注意:ダビング中は、本製品、USB HDD/SSD、ネットワーク HDD の電源コードを抜かないでください。故障や番組の消失の原因になります

ご注意:ダビング中の操作制限について

ダビング中は、以下の操作ができません。

・録画番組の編集(録画モード変換、番組編集(番組名変更、チャプター編集、番組分割、番組結合、番組保護)、番組削除)

・ HDD 設定

・ 本体設定(一部設定可能)

録画した番組を持ち出し用に変換する

本製品で録画した番組は、スマホ/タブレットへ持ち出せるよう変換することができます。 録画した番組を持ち出し変換しスマートフォン/タブレットへ持ち出すと、通信量を気にせず再生することができます。

※ 持ち出し用に変換したデータ(持ち出し前のデータ)はMR4画質のため元の録画データよりも軽く、ネットワーク経由でも安定して再生することができます。

・ ネットワーク HDD の場合、ご利用のネットワーク HDD によりスマホ/タブレットへの持ち出しに対応しているか否かが異なります。スマホ/タブレットへの持ち出しへの対応および、その操作方法については、ご利用のネットワーク HDD の取扱説明書をご確認ください。

・ 本手順ではリモコンでの操作手順を説明しています。「REC-ON App」で録画した番組を持ち出し用に変換する場合の手順は、「REC-ON Appヘルプ」をご参照ください。

ご注意

・ 持ち出し用変換途中に操作を中止することはできません。

・ 持ち出し用変換は、ダビング10の番組の場合は10回おこなうことができます。コピーワンスの番組は1回おこなうことができます。
ダビング10番組の10回目の変換後とコピーワンス番組を変換してスマホ/タブレットに持ち出すと、録画リストに番組は残りません。

・ Android TV OS搭載機器へは持ち出しできません。

録画後に、持ち出せるよう手動で変換する方法

録画予約時に、自動で持ち出し番組を作成するよう設定する方法(USB HDD/SSD のみ)

録画後に、持ち出せるよう手動で変換する方法

  1. [ホーム]を押す

  2. [HDD 設定]を選び、[決定]を押す

  3. [ダビング]を選び、[決定]を押す

  4. ダビング元の[USBx:xxxx]を選び、[決定]を押す

  5. [持ち出し用変換]を選び、[決定]を押す

    ※ 複数の番組を選べます。

  6. 番組を選び終えたら[画質選択]を選び、[決定]を押す

  7. 画質を選び、[決定]を押す

  8. [決定]を選び、[決定]を押す

  9. [ダビング開始]を選び、[決定]を押す

    ⇒ダビングが開始され、放送画面に戻ります。

  10. ご注意:変換中は、本製品、USB HDD/SSD の電源コードを抜かないでください。故障や番組の消失の原因になります

    ご注意:手動での持ち出し用変換中の操作制限について

    手動での持ち出し用変換中は、以下の操作ができません。(自動変換時は制限はありません。)

    ・録画番組の編集(録画モード変換、番組編集(番組名変更、チャプター編集、番組分割、番組結合、番組保護)、番組削除)

    ・HDD 設定

    ・本体設定(一部設定可能)

    ・録画(変換中に録画予約が開始される場合には、持ち出し用変換はできません)

    ・録画リストの表示(録画番組のリスト表示、録画番組の再生など)

    ・番組表の表示(番組表の表示、録画予約など)

    ・予約リストの表示(リスト表示、新規予約、予約修正、予約削除、おまかせ録画の設定、編集、削除など)

    ・番組の配信(端末での視聴(再生))

録画予約時に、自動で持ち出し番組を作成するよう設定する方法(USB HDD/SSD のみ)

  1. [番組表]を押す

  2. [放送切換]で放送波を選ぶ

  3. [録画予約]を選び、[決定]を押す

  4. 録画したい番組を選び、[決定]を押す

  5. [持ち出し用録画]を選び、[決定]を押す

  6. [する]を選び、[決定]を押す

  7. [予約する]を選び、[決定]を押す

    ⇒録画が終了後、本製品の電源「切」のときに、自動的に変換されます。

  8. ・ 変換中に電源を「入」にすると変換が中止されます。もう一度電源を「切」にすると変換が始まります。

    ・ 以下の場合、本製品の電源を「切」にしていても変換されません。
    - 「瞬速起動」の設定時間中
    - 録画予約準備中、および録画予約実行中
    - ソフトウェアの更新中
    - その他、配信の状態などにより、変換が開始されない場合があります。

    ※ 持ち出し用変換が終わっていない場合は、録画情報(録画リスト)に「持ち出し(用)変換予定」と表示されます。

REC-ON Appとは

スマホ/タブレットや Mac、Android TV OS 搭載機器などでテレビを視聴・録画するためのアプリです。「REC-ON App」を使うと以下のことがおこなえます。

・ 放送中の番組を見る

・ 録画予約する(番組表から予約する / 好みの番組を自動で予約する(おまかせ録画) / 外出先からリモート録画予約する(スマートフォンのみ))

・ 再生する

・ 録画した番組を持ち出して見る(スマートフォンのみ)

・準備

スマホ/タブレット/Mac/Android TVで「REC-ON App」をご利用になる場合でも、事前にテレビ等につないで本製品の初回設定を完了しておく必要があります。(添付の「セットアップガイド」参照)

・「REC-ON App」の「仕様」については弊社Webページをご覧ください

https://www.iodata.jp/product/av/info/recon-app/

・「REC-ON App」の「使い方」についてはヘルプをご覧ください

https://www.iodata.jp/lib/manual/rec-on_app/

「REC-ON App」を使う場合の設置イメージ

スマホ/タブレット/Mac/Android TVは、本製品をつないでいるルーターに接続してください。

※ Android TV等の操作について詳しくはご利用のAndroid TV等の取扱説明書をご確認ください。

※ Android TVと本製品をHDMIで接続して使う場合は、普通のテレビと同じ使い方になります。アプリは使用しません。

アプリで視聴(再生)する際のご注意

視聴(再生)前の確認事項

視聴(再生)端末の制限

外出先から視聴(再生)する場合のご注意

ネットワーク環境による制限

視聴(再生)前の確認事項

・ 本製品に電源コード、LAN ケーブルが正しくつながっていることをご確認ください。また、インターネットアクセスが可能なネットワークに接続されていることをご確認ください。

・ 本製品の「ネットワークサーバー機能設定」を[使用する]に設定してください。初回設定で[使用しない]に設定した場合は、[使用する]に設定を変更してください。 (「ネットワークサーバー機能を設定する」参照)

視聴(再生)端末の制限

・ 同時に視聴(再生)できる端末数には制限があります。また、本製品の録画、ダビング、再生の状態によっては、端末で視聴(再生)できない場合があります。詳しくは「同時動作について」をご確認ください。

・「REC-ON App」では地上デジタル/BS・110 度CS デジタルともに「データ放送」「双方向通信サービス」は非対応です。

外出先から視聴(再生)する場合のご注意

・ Android TV OS搭載機器の場合、外出先から視聴(再生)はおこなえません。

・ 事前にご自宅で、「REC-ON App」でチューナーの登録操作をしてください。本製品1台につき登録できる端末は6台までです。登録の有効期限は90日間です。有効期限を延長するには、再度ご自宅でペアリング(登録)の更新をおこなってください。

※ 本仕様は(社)電波産業会(ARIB)が定めた規格となります。ご理解ください。

・外出先からの放送中の番組視聴が禁止されているチャンネルがあります。この場合、放送中の視聴はできません。

ネットワーク環境による制限

・ ご利用のネットワーク環境の品質によっては、再生中に映像や音声が途切れる場合があります。その際は「REC-ON App」の設定で再生品質を低いものにすると改善する場合があります。

・ ファイアウォールやWi-Fiルーターの設定が必要になる場合があります。共有設備などでセキュリティレベルが高く設定されている環境では、外出先からの視聴ができない場合があります。

アプリをインストールしてTVを見る

「REC-ON App」でテレビの視聴をおこなう方法を説明します。

※ 事前にテレビ等につないで本製品の初回設定を完了しておいてください。(添付の「セットアップガイド」参照)

※ スマホ/タブレット/Mac/Android TVは、本製品をつないでいるルーターに接続してください。

※ Apple シリコン搭載 Mac の場合は、macOS に iOS 版 REC-ON App をインストールして利用します。macOS 側の状況により、予期せぬ変更が生じる可能性があります。

アプリをインストールしてTVを見る

  1. 以下のストアで[REC-ON App]を検索し、インストールする

    iPhone/iPad の場合
    App Store

    Mac の場合
    App Store

    Android 端末/Android TV の場合
    Play ストア(Google Play)

    Fire OS 端末
    Amazon(Amazonアプリストア)

  2. [REC-ON App]をタップし起動する

    ※ 「アプリのご紹介」の画面の後に、チューナー(本製品)を自動検索が始まります。

  3. 画面の指示にしたがってチューナーを登録する
    ⇒本製品の映像が「REC-ON App」に表示されます。

「REC-ON App」の「使い方」についてはヘルプをご覧ください

https://www.iodata.jp/lib/manual/rec-on_app/

本操作以降は外出先でもスマホ/タブレット/Mac でテレビの視聴がおこなえます

外出先で視聴ができない場合は、本製品の「ネットワークサーバー機能設定」を[使用する]に設定してください。初回設定で[使用しない]に設定した場合は、[使用する]に設定を変更してください。 (「ネットワークサーバー機能を設定する」参照)

外出先からリモート録画予約する(スマホのみ)

「REC-ON App」で外出先から録画予約する方法を説明します。

  1. [REC-ON App]をタップし起動する

  2. トップ画面の[番組表へ]をタップ

  3. 予約する番組を選ぶ
    ⇒画面の指示にしたがって予約する

「REC-ON App」の「使い方」についてはヘルプをご覧ください

https://www.iodata.jp/lib/manual/rec-on_app/

外出先でテレビの視聴や予約がおこなえない場合

本製品の「ネットワークサーバー機能設定」を[使用する]に設定してください。初回設定で[使用しない]に設定した場合は、[使用する]に設定を変更してください。 (「ネットワークサーバー機能を設定する」参照)

USB HDD/SSD を登録する

USB HDD/SSD は必要に応じて本製品に登録しておいてください。

ご注意

・ USB HDD/SSD を本製品に登録すると、USB HDD/SSD 内のデータはすべて消去されます。すでに保存したデータがある場合は、事前に他のメディア(HDD/SSD やDVD など)にバックアップしてください。

・ 本製品で使用していたUSB HDD/SSD をパソコンで使用するには、パソコンで初期化する必要があります。その際、本製品で保存した番組はすべて消去されます。

・ 本製品で登録したUSB HDD/SSD を、他の機器につないで再生はできません。他の機器に登録すると、本製品で保存した番組はすべて消去されます。

・ USB HDD/SSD は8台まで本製品に登録できます。利用できるのは1台のみです。

・ USB HDD/SSD の登録を解除すると、録画、再生、配信ができなくなります。また、再登録の際に初期化が必要になり、保存した番組はすべて消去されます。

・ [瞬速起動]が設定されている場合、本製品の電源を切っても、USB HDD/SSD の電源ランプは点灯します。

・ HVTR-BCTZ3、HVTR-T3HDZの場合、USB 2.0でUSB HDD/SSD をつないだ場合、同時に録画できるのは2番組までになります。

対応 USB HDD/SSD について

「録画できる HDD/SSD を確認し、登録する」をご覧ください。

あとからUSB HDD/SSD を登録したい場合

USB HDD/SSD をつなぐと、登録の確認画面が表示されます。あとからUSB HDD/SSD を登録したい場合は[いいえ]を選び、[決定]を押してください。またあとで登録をおこなう際は以下の手順で登録画面を表示し、操作してください。

  1. [ホーム]を押す

  2. [HDD 設定]を選び、[決定]を押す

  3. [USB録画設定]を選び、[決定]を押す

  4. [登録設定]を選び、[決定]を押す

  5. ⇒この後は下記手順3にお進みください。

  1. 本製品に USB HDD/SSD をつなぐ
    ⇒登録の確認画面が表示されます。

  2. [はい]を選び、[決定]を押す

  3. [(未登録)]の表示を選び、[決定]を押す

  4. [USB機器を本製品に登録する]を選び、[決定]を押す

  5. [はい]を選び、[決定]を押す

  6. [はい]を選び、[決定]を押す

    ⇒初期化が完了すると、名前の設定をするか確認画面が表示されます。

  7. 設定する場合
    ①[はい]を選び、[決定]を押す
    ②名前を入力し、[決定]を押す
    ③[はい]を選び、[決定]を押す

    設定しない場合
    [いいえ]を選び、[決定]を押す

  8. 次に登録したUSB HDD/SSD を録画用に設定します。

  9. [ホーム]を押す

  10. [HDD 設定]を選び、[決定]を押す

  11. [USB録画設定]を選び、[決定]を押す

  12. [利用設定]で録画するUSB HDD/SSD を選び、[決定]を押す

  13. 以上で登録は完了です。[戻る]を押して設定画面を閉じます。

2台目の USB HDD/SSD を登録する場合

USB HDD/SSD をつなぎ変えてから、同様に登録してください。

USB HDD/SSD の取り外し方法

・ USB-HDD/SSD に録画していないことを確認してください。

・ USB-HDD/SSD に予約録画をしていないことを確認してください。

・ 本製品の電源ボタンを短押しし、スタンバイ状態にしてください。電源ランプが赤点灯であればスタンバイ状態です。

上記の状態を確認したらUSB-HDD/SSD を本製品から取り外しできます。本製品からUSBケーブルを抜いてください。
また、再接続する際も本製品がスタンバイ状態でおこなってください。

ネットワーク接続設定をする

ルーターを設定する手順を説明します。

  1. 本製品とルーターを有線LAN接続する

  2. [ホーム]を押す

  3. [本体設定]を選び、[決定]を押す

  4. [本体設定]を選び、[決定]を押す

  5. [ネットワーク設定]を選び、[決定]を押す

  6. [ネットワーク接続設定]を選び、[決定]を押す

  7. [自動設定]を選び、[決定]を押す

  8. ネットワーク接続に成功したことを確認し、[決定]を押す

  9. 以上で登録は完了です。

ネットワークサーバー機能を設定する

ネットワーク HDD に録画したり、録画した番組や放送中の番組をスマホ/タブレット/Mac/Android TVなどで見る場合は、「ネットワークサーバー機能設定」を[使用する]に設定してください。

  1. 本製品とルーターを有線LAN接続する

  2. [ホーム]を押す

  3. [本体設定]を選び、[決定]を押す

  4. [本体設定]を選び、[決定]を押す

  5. [ネットワーク設定]を選び、[決定]を押す

  6. [ネットワークサーバー設定]を選び、[決定]を押す

  7. [ネットワークサーバー機能設定]を選び、[決定]を押す

  8. [使用する]を選び、[決定]を押す

  9. 以上で設定は完了です。

ネットワーク HDDを登録する

ネットワーク HDDは必要に応じて本製品に登録しておいてください。

・本製品に2台まで登録できます

・対応ネットワーク HDD(NAS)について

「録画できる HDD/SSD を確認し、登録する」をご覧ください。

準備:以下の設定をしておいてください

ネットワーク接続設定する

ネットワークサーバー機能を設定する

  1. ネットワーク HDDを本製品と同じルーターにつなぐ

  2. [ホーム]を押す

  3. [HDD 設定]を選び、[決定]を押す

  4. [ネットワーク録画設定]を選び、[決定]を押す

  5. [(未登録)]を選び、[決定]を押す

  6. 登録するネットワーク HDDを選び、[決定]を押す

  7. [ネットワーク HDDを録画先として登録する]を選び、[決定]を押す

  8. 以上で登録は完了です。

リモコンでテレビを操作する

本製品のリモコンで、お使いのテレビの電源入/切、入力の切換、音量の調整を操作できるようになります。

  1. [ホーム]を押す

  2. [本体設定]を選び、[決定]を押す

  3. [本体設定]を選び、[決定]を押す

  4. [初回設定/その他]を選び、[決定]を押す

  5. [リモコン設定]を選び、[決定]を押す

  6. [テレビリモコン設定]を選び、[決定]を押す

  7. [TV電源]を押しながら、お使いのテレビメーカーの3桁の数字を順に押す

    アイ・オー・データ機器 001 031

    ソニー 002

    パナソニック 003 004

    シャープ 005 006 007

    日立 008

    東芝 009 010

    JVC 011

    三洋 012 013

    三菱 014

    パイオニア 015

    LG 016

    フナイ/DX 017

    ハイセンス 018

    アイリスオーヤマ 019

    TCL 020

    設定なし(出荷時設定) 000

    例)ソニー002の場合

    [TV電源]を押しながら、[10/0]→[10/0]→[2]の順に押します。

  8. 本製品のリモコンをテレビに向け、TV 音量「+」/「ー」ボタンを押し、テレビの音量が変化するか確認する

    ※ テレビの音量が変化しない場合は、再度手順7をおこなってください。同じメーカーの番号が複数ある場合は、別の番号をお試しください。

    ご注意

    テレビにより、本製品のリモコンでは操作できない場合があります。テレビ側にリモコンコード変更機能がある場合は、変更してお試しください。それでも操作できない場合は、テレビのリモコンをお使いください。

  9. [決定]を押す

  10. 以上で設定は完了です。

    ※ リモコンの電池交換後も設定は保持されます。

リモコンコードを変更する

本製品や弊社製録画テレビチューナーを2台以上使用している場合、リモコンを操作すると本製品以外の録画テレビチューナーも反応してしまいます。その場合は、以下の手順で本体とリモコンのリモコンコードを変更してください。

  1. [ホーム]を押す

  2. [本体設定]を選び、[決定]を押す

  3. [本体設定]を選び、[決定]を押す

  4. [初回設定/その他]を選び、[決定]を押す

  5. [リモコン設定]を選び、[決定]を押す

  6. [本体リモコン設定]を選び、[決定]を押す

  7. 本製品に設定するリモコンコードを選び、[決定]を押す

  8. リモコン側のリモコンコードを設定する

    ※ 画面にしたがって設定してください。

    例)リモコンコード2の場合

    [ホーム]を押しながら、[10/0]→[10/0]→[2]の順に押します。

  9. [決定]を押す

  10. 以上で設定は完了です。

    ※ リモコンの電池交換後も設定は保持されます。

    ※ リモコンコードは、4台まで変更できます。

本製品とリモコンのリモコンコードが異なる場合

本製品の[予約ランプ]と[リモートランプ]が点滅します。

※ [本体設定]-[本体設定]-[初回設定/ その他]-[リモコン設定]-[リモコン不一致表示]を[表示しない]に設定していると、点滅しません。

HDMIリンク機能を使う

HDMIリンクでできること

HDMIリンク対応テレビとHDMIケーブルでつなぐことで、本製品とテレビの連携操作ができるようになります。

・ 本製品の電源を入れると、自動でテレビの電源が入り、本製品が接続されているHDMI入力に切り換わります

・ テレビの電源を切ると、本製品の電源も切れます。

・ テレビのリモコンで、本製品を操作できます。(テレビリモコンの[上下左右]ボタン、[決定]ボタン、[戻る]ボタンが使えます)

※ テレビリモコンの[青]、[赤]ボタンは、次のボタンとして機能します。
[青]ボタン → 本製品の[ホーム]ボタン
[赤]ボタン → 本製品の[サブメニュー]ボタン

設定手順

テレビ側の準備

テレビのHDMIリンク(CEC)を[有効]にしておいてください。操作はご使用のテレビの取扱説明書をご確認ください。

  1. [ホーム]を押す

  2. [本体設定]を選び、[決定]を押す

  3. [本体設定]を選び、[決定]を押す

  4. [HDMI接続設定]を選び、[決定]を押す

  5. [HDMIリンク]を選び、[決定]を押す

  6. [入]を選び、[決定]を押す

  7. 以上で設定は完了です。

    ご注意

    ・接続するテレビにより操作できる機能は異なります。すべてのHDMIリンク対応テレビとの連係動作を保証するものではありません。

    ・お客様の意図しない動作をする場合があります。そのようなときは[HDMIリンク]を[切]にしてください。

本製品のソフトウェアを更新する

本製品をより快適にご利用いただくため、弊社が本製品のソフトウェア(ファームウェア)のアップデートを公開する場合があります。
ご購入時はソフトウェア(ファームウェア)が自動で更新される設定になっています。
手動で更新する場合は、以下のいずれかの方法でおこなってください。

本製品をインターネットにつないで更新する

USBメモリーを使って更新する

本製品をインターネットにつないで更新する

※ 本製品をインターネットにつながるネットワーク環境に接続しておいてください。

  1. [ホーム]を押す

  2. [本体設定]を選び、[決定]を押す

  3. [本体設定]を選び、[決定]を押す

  4. [初回設定/その他]を選び、[決定]を押す

  5. [ソフトウェアの更新]を選び、[決定]を押す

  6. [ネットワークによる更新]を選び、[決定]を押す

    ※ 更新中、本製品のコンセントを抜かないでください。故障の原因になります。

  7. 更新が終了すると、自動で電源が切れ再起動します。本製品をリモコン操作できる状態になれば更新完了です。

USBメモリーを使って更新する

弊社Webページよりソフトウェア(ファームウェア)をUSB メモリーにダウンロードし、本製品のソフトウェア(ファームウェア)を更新できます。

作業用パソコンをご用意ください

アップデート前に、録画またはダビングをおこなってない状態、また予約録画開始15分前になっていないことを確認してください

  1. ソフトウェア(ファームウェア)をダウンロードする

    ① パソコンのWebブラウザーで以下のページにアクセスする
    https://www.iodata.jp/p/241666

    ※ 「HVTR-BCTZ3」のページが開きますが、ソフトウェアは共通です。

    ② 「ソフトウェアダウンロード」から「ファームウェア」を開く

    ③ OSを選択し、「ダウンロード」をクリック

  2. ダウンロードしたファイル「bctz_fw_xxxxx.exe」を実行する(xは数字)
    ⇒デスクトップ上に「bctz_fw_xxxxx」フォルダーが作成されます。

  3. デスクトップ上の[bctz_fw_xxxxx] フォルダーの中にある[X6093JLxxxxxxx.bin] ファイルをUSBメモリーにコピーする(xは数字)

    ※ USBメモリーには[X6093JLxxxxxxx.bin]ファイルのみが存在するようにしてください。

  4. パソコンからUSBメモリーを安全に取り外す

  5. 本製品の電源を入れる

  6. [ホーム]を押す

  7. [本体設定]を選び、[決定]を押す

  8. [本体設定]を選び、[決定]を押す

  9. [初回設定/その他]を選び、[決定]を押す

  10. [ソフトウェアの更新]を選び、[決定]を押す

  11. [バージョン情報]を選び、[決定]を押す

  12. [ソフトウェアバージョン表示]画面が表示されている状態で、USBメモリーを本製品の USBポートに挿入する

  13. 更新の確認画面が表示されるので[はい]を選び、[決定]を押す

    ⇒更新が終了すると、自動で電源が切れ再起動します。

    ※ 更新中、本製品のコンセントを抜かないでください。故障の原因になります。

  14. 本製品をリモコン操作できるかどうか確認する
    ⇒本製品をリモコン操作できる状態になれば更新完了です。

  15. 本製品の電源を切り、USBメモリーを取り外す

本体の設定を変更する

本製品の設定を変更する手順を説明します。

※ 各設定項目については、画面に表示される説明をご確認ください。

※ 録画中は変更できない設定項目があります。

  1. [ホーム]を押す

  2. [本体設定]を選び、[決定]を押す

  3. 変更したい項目の設定を変更する

本製品を初期化する

設定ごとに初期化したり、すべての設定を出荷時設定に戻したりすることができます。
本製品を廃棄・譲渡するときは、[工場出荷状態に戻す] ことをおすすめします。

  1. [ホーム]を押す

  2. [本体設定]を選び、[決定]を押す

  3. [本体設定]を選び、[決定]を押す

  4. [初回設定/その他]を選び、[決定]を押す

  5. [初期化]を選び、[決定]を押す

  6. 初期化する項目を選び、画面の指示にしたがって初期化する

    ▼初期化の種類

    本体設定初期化

    本体設定の各種設定を初期化します。ただし、ネットワーク設定、リモコン設定は初期化されません。

    ネットワーク設定初期化

    ネットワーク設定を初期化します。ただし、宅外配信リスト、インターネット接続設定は初期化されません。

    宅外配信設定初期化

    宅外配信設定を初期化します。宅外配信リストに登録したスマホ/タブレットもすべて削除されます。

    工場出荷時状態に戻す

    お買い上げ時の状態に戻します。録画内容や、本製品のすべての設定情報が削除されます。

    ※ 初期化時に USB HDD/SSD を取り外しておき、初期化後にその USB HDD/SSD をつなぎなおしても録画内容を見ることはできません。ご注意ください。

電源について

電源が入らない

電源が勝手に切れる

電源を切っているのに動作音がする

電源が入らない

・ 本体前面の電源ボタンを押して電源が入るかご確認ください。

・ 電源プラグがコンセントにつながっているかご確認ください。

・ リモコンの乾電池が消耗してないかご確認ください。

電源が勝手に切れる

・ 「未使用時自動電源オフ」機能が働いている場合、自動で電源が切れます。
[ホーム]ボタン→[本体設定]→[本体設定]→[初回設定/その他]→[未使用時自動電源オフ]で設定できます。

電源を切っているのに動作音がする

・ 番組表の情報取得、ソフトウェア更新、予約録画などのため、電源を切っていても動作することがあります。

画面表示/音声について

画面が映らない

映りが悪い(一瞬映像が乱れる、ブロックノイズが表示される)

映像に黒い部分がある

真っ黒の画面が表示される

テレビから音声が聞こえない(映像は表示される)

画面が映らない

・ テレビと本製品がHDMI ケーブルで正しくつながれているかご確認ください。

・ 本製品とテレビの電源が入っているかご確認ください。

・ テレビの入力を、テレビのリモコンで[HDMI]に切り替えてください。HDMI端子の番号をご確認ください。(HDMI 1など)

映りが悪い(一瞬映像が乱れる、ブロックノイズが表示される)

・ アンテナが正しくつながれているかご確認ください。

・ 地上デジタルのチャンネルスキャンをやり直してみてください。
[ホーム]ボタン→[本体設定]→[放送受信設定]→[地上デジタル設定]→[チャンネル再スキャン]の順に選びます。

・ アンテナの向きをご確認ください。チャンネル受信レベルを確認しながら、向きを調整してください。

【地上デジタルの場合】
[ホーム]ボタン→[本体設定]→[放送受信設定]→[地上デジタル設定]→[アンテナ設定]の順に選びます。

【BS・110度CSデジタルの場合】
[ホーム]ボタン→[本体設定]→[放送受信設定]→[BS・CS デジタル設定]→[アンテナ設定]の順に選びます。

・アンテナ芯線などの折れ・曲がりがある場合は、交換してお試しください。

映像に黒い部分がある

・ 映画などの一部の番組では、完全に画面いっぱいに表示されないことがあります。

真っ黒の画面が表示される

・ 「瞬速起動」設定時間帯は、本製品は黒画面を表示しています。そのため、お使いのテレビ(モニター)によっては、省電力モードなどから通常動作に復帰することがあります。

テレビから音声が聞こえない(映像は表示される)

・ 本製品の設定で音声出力形式を変更してお試ください。
1. [ホーム]ボタン-[本体設定]-[音声設定]-[デジタル出力設定]の順に選びます。
2. 設定を[自動]から[PCM]に変更し、[戻る] ボタンで設定画面を閉じます。
3. REC-ON 本体、テレビ両方の電源を入れなおします。

・ テレビと本製品がHDMIケーブルで正しくつながれているかご確認ください。

・ テレビ側の音量が消音になっていないかご確認ください。

・ テレビにHDMI端子が複数ある場合は、別のHDMI端子に接続しご確認ください。

・ テレビの入力を、テレビのリモコンで[HDMI]に切り替えてください。HDMI端子の番号をご確認ください。(HDMI 1 など)

・ テレビの電源コンセントを抜き差しし、電源を入れなおしてみてください。

テレビの受信について

放送を受信できない

地上デジタル放送が映らない

テレビで、地上・BS・110 度CSデジタル放送が映らない

BS・110 度CSデジタル放送が映らない

ケーブルテレビ(CATV)放送が受信できない

WOWOWやスターチャンネルなどの有料放送を視聴できない

放送を受信できない

・ アンテナが正しくつながれているかご確認ください。

・ 地上デジタルのチャンネルスキャンをやり直してみてください。[ホーム]ボタン→[本体設定]→[放送受信設定]→[地上デジタル設定]→[チャンネル再スキャン]の順に選びます。

・ miniB-CASカードを正しくセットしてください。

・ BSデジタルの場合、BSアンテナの電源設定をご確認ください。[ホーム]ボタン→[本体設定]→[放送受信設定]→[BS・CS デジタル設定]→[アンテナ電源]の順に確認します。

地上デジタル放送が映らない

・ アンテナが正しくつながれているかご確認ください。

・ 地上デジタル放送のアンテナはUHFアンテナかどうかご確認ください。VHFアンテナのみの場合、地上デジタル放送は受信できません。

・ 地上デジタルのチャンネルスキャンをやり直してみてください[ホーム]ボタン→[本体設定]→[放送受信設定]→[地上デジタル設定]→[チャンネル再スキャン]の順に選びます。

・ 受信電波が弱すぎる場合でも強すぎる場合でも受信レベルが下がり、[放送受信設定]の[信号品質]の数値が低くなります。 [ホーム]ボタン→[本体設定]→[放送受信設定]→[地上デジタル設定]→[アンテナ設定]の順に選び、画面を確認しながらアンテナを調整してください。[信号品質]の数値は「20」以上、[信号強度]の数値は「18~37」を目安にしてください。

・ 地上デジタル放送の受信電波が強すぎる場合は、[アッテネーター]を[入]にすると改善する場合があります。[ホーム]ボタン→[本体設定]→[放送受信設定]→[地上デジタル設定]→[アンテナ設定]の順に選び[アッテネーター]を[入]にします。

・ マンションなどの共聴システムにつなぐ場合、地上デジタルとBSデジタルの信号が混ぜられている場合があります。この場合、UV/BS 110度CS分波器をご使用ください。また、BSアンテナ電源は必ず管理人に確認して設定してください。

・ 市販の地上デジタル放送用UHFアンテナ、ブースター、混合機などを用意することをご検討ください。

テレビで、地上・BS・110 度CSデジタル放送が映らない

・ アンテナ出力設定が[切]になっていないか確認し、[入]に設定してください。[ホーム]ボタン→[本体設定]→[放送受信設定]→[一般設定]→[アンテナ出力]の順に選び、[入]を選びます。

BS・110 度CSデジタル放送が映らない

・ BS・110 度CS デジタルのアンテナ接続をご確認ください。

・ 降雨など天候が悪い場合や雪がアンテナに付着していると、電波障害により、放送が映らないことや映像や音声が乱れることがあります。

・ ブースターや分配器をご使用になっている場合は、110度CS帯域(2150MHz)まで対応した機器に交換する必要があります。

・ ご利用の環境によりアンテナへ電源供給をする必要があります。アンテナへの電源供給を[供給する]にしてください。[ホーム]ボタン→[本体設定]→[放送受信設定]→[BS・CS デジタル設定]→[アンテナ電源]の順に選び、[供給する(個別)]を選びます。

※ 待機設定が[通常待機]に設定されます。([省エネ待機]にすると、電源オフ時にアンテナに電源を供給できません)

・ 受信電波が弱すぎる場合でも強すぎる場合でも受信レベルが下がり、[放送受信設定]の「アンテナレベル」の数値が低くなります。[ホーム]ボタン→[本体設定]→[放送受信設定]→[BS・CS デジタル設定]→[アンテナ設定]の順に選び、画面を確認しながらアンテナを調整してください。アンテナの数値は、「20」以上を目安にしてください。

ケーブルテレビ(CATV)放送が受信できない

・ CATV 会社の加入手続きが必要です。CATV 会社にご確認ください。

・ 本製品とアンテナをパススルーで正しく接続しているかご確認ください。

・ 受信できないチャンネルが存在する場合があります。詳しくは、ケーブルテレビ会社にお問い合わせください。

WOWOWやスターチャンネルなどの有料放送を視聴できない

・ 有料放送を視聴する場合、放送会社との受信契約が必要です。

リモコンについて

リモコン操作ができない

リモコン操作ができない

・ 電池ふたを開け、電池の向き(+-)をご確認ください。

・ 新しい電池に入れかえてください。

・ リモコン受光部・リモコン操作範囲をご確認ください。(添付の「セットアップガイド」参照)

・ 本体の電源ボタンを長押しして電源をオフにした後、再度電源をオンにし、リモコン操作できるかどうかご確認ください。

録画について

録画できない

録画予約できない

他の弊社製録画テレビチューナーで使用していたUSB HDD/SSD に入っている録画番組を個別に、本製品につないだUSB HDD/SSD にダビングしたい

録画できない

・ アンテナがつながれているかご確認ください。

・ miniB-CASカードがセットされているかご確認ください。

・ HDD/SSD の残量が不足してないかご確認ください。

・ USB HDD/SSD に録画できない場合、接続しているUSB HDD/SSD の[利用設定]が正しくおこなわれているかご確認ください。[ホーム]ボタン→[HDD 設定]→[USB 録画設定]→[利用設定]で設定します。

録画予約できない

・ 予約が重なっていないかご確認ください。

・ 録画先(USB HDD/SSD やネットワーク HDD)の接続をご確認ください。

・ HDD/SSD の残量が不足してないかご確認ください。

・ USB HDD/SSD に録画できない場合、接続しているUSB HDD/SSD の[利用設定]が正しくおこなわれているかご確認ください。[ホーム]ボタン→[HDD 設定]→[USB 録画設定]→[利用設定]で設定します。

他の弊社製録画テレビチューナーで使用していたUSB HDD/SSD に入っている録画番組を個別に、本製品につないだUSB HDD/SSD にダビングしたい

他の録画テレビチューナーを操作し、本製品につないだUSB HDD/SSD にダビングすることができます。ダビング先に[LAN]を選択し、本製品を選択してください。操作方法は「USB HDD/SSD ⇒ ネットワーク HDD 間のダビング」を参考にしてください。

設定について

設定したパスワードをクリアしたい/ パスワードを忘れた

設定したパスワードをクリアしたい/ パスワードを忘れた

・ [インターネット接続設定]、[視聴年齢制限]で設定したパスワードを忘れた場合、パスワード入力画面で[4737]を入力すれば、パスワードがクリアされます。新しいパスワードを設定し直してください。
[ホーム]ボタン→[本体設定]→[本体設定]→[ネットワーク設定]で設定します。

スマホ/タブレット/Macでの利用について

外出先から視聴(再生)できない

・「REC-ON App」の「仕様」については弊社Webページをご覧ください

https://www.iodata.jp/product/av/info/recon-app/

・「REC-ON App」の「使い方」についてはヘルプをご覧ください

https://www.iodata.jp/lib/manual/rec-on_app/

外出先から視聴(再生)できない

・ 本製品の録画やダビングの状態によっては、視聴(再生)できません。

・ 外出先から、放送中の番組または USB HDD/SSD に録画した番組を同時に視聴(再生)できるのは1台のみです。
Android端末で外出先から視聴中に、ホームボタンや電源ボタンを押した場合、リモート接続されたままになる場合があり他の端末で視聴できなくなります。その場合はアプリを終了してください。

・ 本製品側、または端末側のネットワーク環境が不安定な場合や実転送速度が遅い場合、視聴(再生)できないことがあります。

・ ご利用のネットワーク環境により、ファイアウォールやWi-Fiルーターの設定が必要になる場合があります。共有設備などでセキュリティレベルが高く設定されている環境では、外出先からの視聴はご利用になれない場合があります。
https://www.iodata.jp/support/qanda/answer/s19730.htm参照)

各部の名称

前面

背面

リモコン

前面

リモコン受光部本製品のリモコンをこの受光部に向けて使用してください。
電源ボタン電源オン/スタンバイ短押しする
主電源オフ約8秒長押しする
電源ランプ点灯電源オン
点滅起動中
点灯スタンバイ時
点灯番組表更新中
点滅ファームウェア更新中
-消灯スタンバイ時(省エネ待機設定時)
録画ランプ点灯録画中
予約ランプ点灯録画予約あり
リモートランプ点灯リモート接続待ち受け中

エラー動作時のランプ状態

電源ランプ録画ランプ予約ランプリモートランプ状態確認・対処
本体起動時の異常電源ケーブルを抜き差ししてください。
--電源状態の異常電源ケーブルを抜き差ししてください。
--
--
---
-アンテナスルー電源の異常本製品のスルー端子に接続されたアンテナを取り外し、電源ケーブルを抜き差ししてください。
--BS電源の異常BSアンテナの接続状態を確認してください。共聴アンテナの場合は本製品のBS電源供給を「供給しない」に設定してください。
---予約開始エラー録画予定の番組が開始されませんでした。
--ファン動作の異常本体背面のファンに異物やホコリなどが付着していないかご確認ください。
-HDMIの検出異常HDMIケーブルがしっかりと接続されているか確認してください。また電源ケーブルを抜き差ししてください。
-
--リモコンコードの不一致リモコンコードの設定をご確認ください。

背面

電源コード電源コンセントに挿します。
BS・110度CSデジタルアンテナ端子(上:入力、下:出力)

入力(アンテナから)
壁面アンテナ端子とつなぎます。

出力(テレビへ)
テレビとつなぎます。

※ パソコンのディスプレイ等、チューナーレスのモニターにつなぐ場合、本手順は不要です。

地上デジタルアンテナアンテナ端子(上:入力、下:出力)

入力(アンテナから)
壁面アンテナ端子とつなぎます。

出力(テレビへ)
テレビとつなぎます。

※ パソコンのディスプレイ等、チューナーレスのモニターにつなぐ場合、本手順は不要です。

TV用HDMI端子テレビとつなぎます。
HDD/SSD用USB端子録画用の USB HDD/SSD をつなぐことができます。また、本製品のソフトウェア(ファームウェア)更新のために USBメモリーをつなぐことができます。
LAN端子ルーターとつなぎます。

リモコン

テレビの電源を入/切する
本製品の電源を入/切する
テレビの音量を調節する
テレビの入力を切り換える
チャンネルを選ぶ
画面にあわせて情報を表示する
番組表を表示する
ホーム画面を表示する

・選択および決定する

再生中の基本操作をおこなう

録画リストを表示する
前の画面に戻る/録画再生を停止する
サブメニューを表示する

録画(予約)する

※ USB HDD/SSD に録画する場合のみ

放送を切り換える(地上デジタル / BS デジタル / 110 度CS デジタル)

・チャンネル番号を選ぶ

・番号や文字を入力する

操作画面などで使う

サブメニューについて

[サブメニュー] は操作中の画面により、表示されるメニューが異なります。

※ その画面で操作ができないメニューはグレー表示または非表示になります。

放送中の番組の視聴中

番組表表示中

録画番組視聴中

録画リスト表示中

予約リスト表示中

予約リスト内、予約結果のお知らせ表示中

放送中の番組の視聴中

音声音声を切り換えることができます。
字幕字幕の表示のオン/オフがおこなえます。
映像複数のカメラアングル(映像)が収録されている番組のアングルを切り換えます。
マルチビューマルチ番組の映像、音声などを切り換えます。
サービス切換サービスを切り換えます(独立データ放送に切り換えます)。
超解像設定超解像設定のオン/オフがおこなえます。オンにするとSD画質映像を表示する際に、解像度感を高めて画質のぼやけ感を低減することができます。
アンテナレベル表示地上デジタル放送のアンテナレベルを表示します。レベルを確認しながら感度が最大になるようにアンテナの向きを調節することができます。
録画モード録画モード(画質)を設定することができます。
選局ガイド視聴するチャンネルを選択することができます。
番組説明放送中の番組の説明を表示します。
データ放送データ放送の表示/非表示がおこなえます。
停止操作録画を停止します。

番組表表示中

日付切り換え番組表に表示する日付を切り換えます。
番組検索番組を検索することができます。
注目番組放送局おすすめの注目番組を表示します。
表示チャンネル数切り換え番組表の1ページに表示するチャンネル数を設定します。
表示時間数切り換え番組表の1ページに表示する時間数を設定します。
文字サイズの切り換え番組表の文字サイズを切り換えることができます。
表示対象切り換え番組表の表示対象(表示サービスタイプ)を切り換えることができます。
ジャンル色分け番組表のジャンルによる色分けの設定を変更することができます。
録画モード設定録画モード(画質)を設定することができます。
予約リスト予約リストを表示します。

録画番組視聴中

音声音声を切り換えることができます。
字幕字幕の表示のオン/オフがおこなえます。
リピート選択した録画番組のリピート再生の設定がおこなえます。オフ/番組/チャプターから選択します。
アングル表示アングルを切り替えます。
ノイズリダクションノイズリダクションのオン/オフがおこなえます。
超解像設定超解像設定のオン/オフがおこなえます。オンにするとSD画質映像を表示する際に、解像度感を高めて画質のぼやけ感を低減することができます。
サーチ選択したチャプターに飛ぶことができます。
番組説明視聴中の録画番組の説明を表示します。

録画リスト表示中

最初から再生選択した録画番組を最初から再生します。
録画モード変換録画モード(画質)を設定することができます。
保存フォルダ変更録画番組を同じHDD/SSD の別のフォルダーに移動することができます。
番組編集録画番組の番組名変更/チャプター編集/番組分割/番組結合/番組保護などの編集がおこなえます。
視聴制限一時解除録画番組に視聴制限をかけてある場合、一時的に解除することができます。
サムネイル音声録画番組のサムネイル音声のオン/オフ(消音)がおこなえます。
ジャンル/並び順録画リストに表示するジャンルを絞ったり、並び順を変更したりすることができます。
ページ指定ジャンプ指定した録画リストのページを表示します。
番組説明録画番組の説明を表示します。
番組削除選択した録画番組を削除します。
番組削除(複数)録画番組を複数一度に削除します。
引っ込し情報削除選択した録画番組の引越し情報を削除することができます。

予約リスト表示中

予約修正登録済みの予約の修正をおこないます。
予約削除予約を削除します。
予約削除(複数)予約を複数一度に削除します。
新規予約新規の録画予約を手動でおこなえます。
スキップ設定くり返し予約している場合に次回のくり返し予約をスキップするかどうかのオン/オフ設定がおこなえます。

予約リスト内、予約結果のお知らせ表示中

設定どおりに録画できなかった場合に「予約結果のお知らせ」が表示されます。

お知らせ削除お知らせを削除します。
お知らせ削除(複数)お知らせを複数一度に削除します。

同時動作について

単独で動作した場合の上限

録画中の同時動作台数限

その他の制限

単独で動作した場合の上限

録画(録画番組数)

アプリでの放送中の番組の視聴(配信端末台数)

アプリでの録画番組の再生(配信端末台数)

録画(録画番組数)

同時に録画できる番組数は録画先のHDD/SSD と録画テレビチューナーにより異なります。以下をご確認ください。

録画先HVTR-BCTZ3の場合HVTR-BCTZ2/Eの場合
USB 3.0 HDD/SSD3番組まで(※1)2番組まで
USB 2.0 HDD/SSD2番組まで2番組まで
ネットワーク HDD2番組まで(※2)2番組まで(※2)

※1:3番組の内の1番組は録画モードが一旦[DR]で録画され、自動的に後で目的の録画モードに変換されます(ご使用の状況によっては自動的に変換されない場合があります)。

※2:異なるネットワーク HDDでも録画できますが、全体で2番組までとなります。また、録画時にネットワーク HDDが見つからない場合は、USB HDD/SSD に録画します。このときUSB HDD/SSDも見つからない場合は、録画されません。(ネットワーク HDDへの1番組の録画は、配信1台分に相当します。)

録画の制限

・録画予約最大数:200

・1番組あたりの連続録画可能時間:15時間

ご注意

・[HDD 設定]内の[利⽤設定]で設定したUSB HDD/SSD にのみ録画できます。また、再生も[利⽤設定]しているUSB HDD/SSDからのみできます。

・USB HDD/SSD への最大録画可能タイトル数:5000(使用状況や記録する内容等により少なくなることがあります)

アプリでの放送中の番組の視聴(配信端末台数)

「REC-ON App」で放送中の番組を視聴する場合の同時に視聴できる端末の台数は、配信先により異なります。以下をご確認ください。

配信先配信端末台数
宅内2台まで
外出先1台まで

※ 録画や番組の配信状況によって、本体で現在視聴中のチャンネルから別のチャンネルに切り換えできないことがあります。

アプリでの録画番組の再生(配信端末台数)

「REC-ON App」で録画した番組を再生する場合の同時に再生できる端末の台数は、配信先と録画先により異なります。以下をご確認ください。

配信先録画先配信端末台数
宅内USB 3.0 HDD/SSD3台まで
USB 2.0 HDD/SSD3台まで
ネットワーク HDDネットワーク HDD の通信機能に依存します。
外出先USB 3.0 HDD/SSD1台まで
USB 2.0 HDD/SSD1台まで
ネットワーク HDDネットワーク HDD の通信機能に依存します。

ご注意

・端末(スマホ/ タブレットなど)への配信台数は、放送中の番組と録画番組を合わせ、同時に最大3台までです。

・放送中の番組の配信および変換をともなう配信は、同時に最大2 台までです。

録画中の同時動作台数

録画中に「REC-ON App」を使い、放送中の番組の視聴や録画番組を再生する場合の同時動作台数です。

宅内での放送中の番組の視聴可能台数

宅内での録画番組の再生可能台数

宅内での放送中の番組の視聴可能台数

【HVTR-BCTZ3】

録画先録画中番組数視聴可能台数
USB 3.0 HDD/SSD3番組(※1)不可
USB 3.0/2.0 HDD/SSD2番組1台まで(※2)
1番組2台まで(※3)
ネットワーク HDD2番組不可(※4)
1番組1台まで(※5)
なし録画なし2台まで

【HVTR-BCTZ2/E】

録画先録画中番組数視聴可能台数
USB 3.0/2.0 HDD/SSD2番組(※1)不可
1番組1台まで
ネットワーク HDD2番組(※1)不可
1番組1台まで
なし録画なし2台まで

※1 テレビなど本製品のHDMI端子を通しての視聴は録画中の番組のみとなります。

※2 本体での視聴や再生、録画の状況によって、視聴不可となることがあります。

※3 本体での視聴や再生、録画の状況によって、1台までとなることがあります。

※4 録画が1つ以上DR画質の場合は、1台となることがあります。

※5 録画がDR画質の場合は、2台となることがあります。

ご注意

・録画や番組の配信状況によって、本体での視聴は録画中または配信中の番組のみとなることがあります。

・録画や番組の配信状況によって、本体での録画番組の再生ができない場合があります。

宅内での録画番組の再生可能台数

【HVTR-BCTZ3】

録画先録画中番組数再生可能台数(※1)
USB 3.0 HDD/SSD3番組(※2)2台まで(※3)
2番組3台まで(※4)
1番組3台まで
USB 2.0 HDD/SSD2番組2台まで(※3)
1番組3台まで(※4)
ネットワーク HDD2番組1台まで
1番組2台まで
なし録画なし3台まで

【HVTR-BCTZ2/E】

録画先録画中番組数再生可能台数(※1)
USB 3.0 HDD/SSD2番組(※2)3台まで(※4)
1番組3台まで
USB 2.0 HDD/SSD2番組(※2)2台まで(※3)
1番組3台まで(※4)
ネットワーク HDD2番組(※2)1台まで
1番組2台まで
なし録画なし3台まで

※1 本体での視聴や再生、録画の状況によって、変換をともなう配信ができないことがあります。

※2 テレビなど本製品のHDMI 端子を通しての視聴は録画中の番組のみとなります。

※3 本体での視聴や再生、録画の状況によって、1台までとなることがあります。

※4 本体での視聴や再生、録画の状況によって、2台までとなることがあります。

ご注意

・録画や番組の配信状況によって、本体での視聴は録画中または配信中の番組のみとなることがあります。

・録画や番組の配信状況によって、本体での録画番組の再生ができない場合があります。

録画と配信の優先順位について

・配信中に録画予約が動作する場合、録画予約が優先されます。配信中に録画予約が動作し配信可能本数を超えた場合、配信が停止されます。

・変換をともなう配信(例:2台のスマホで視聴/再生している場合など)を2台におこなっているとき、ネットワーク HDD にDR以外の画質で1番組録画する場合は、最後に開始した端末への配信を停止します。
ネットワーク HDDへDR以外の画質で2番組同時に録画する場合は、端末への配信を2台とも停止します。

・録画中の外出先での視聴/再生は、録画数によらず1台まで可能です。上記の宅内での視聴/再生可能台数が不可の状態では、同様に不可です。

その他の制限

・録画や番組の配信状況によって、現在視聴中のチャンネルから別のチャンネルに切り換えできないことがあります。別のチャンネルを視聴したい場合は、録画、または番組の配信を停止してください。

・USB HDD/SSD → ネットワーク HDD のダビング中に、さらに USB HDD/SSD → ネットワーク HDD のダビングはできません。(ダビング処理は、1つの処理のみ動作します。)

・録画中は、初期化操作はできません。

・現在録画中または配信中の番組に対して、編集操作(削除や番組名変更など)はできません。

・録画や配信と、ダビング- 持ち出し用変換の同時動作はできません。また、持ち出し用変換中は、番組の再生はできません(録画リストを表示できません)。

本製品で使われるソフトウェアのライセンス情報

本内容はライセンス情報のため、操作には関係ありません。

本製品に組み込まれたソフトウェアは、複数の独立したソフトウェアコンポーネントで構成され、個々のソフトウェアコンポーネントは、それぞれにアイ・オー・データ機器または第三者の著作権が存在します。 本製品は、第三者が規定したエンドユーザーライセンスアグリーメントあるいは著作権通知(以下、「EULA」といいます。)に基づきフリーソフトウェアとして配布されるソフトウェアコンポーネントを使用しております。 「EULA」の中には、実行形式のソフトウェアコンポーネントを配布する条件として、当該コンポーネントのソースコードの入手を可能にするよう求めているものがあります。当該「EULA」の対象となるソフトウェアコンポーネントのお問い合わせに関しては、弊社ホームページをご覧いただくようお願いいたします。 また、本製品のソフトウェアコンポーネントには、本製品用に開発または作成したソフトウェアも含まれており、これらソフトウェアおよびそれに付帯したドキュメント類には、著作権法、国際条約条項および他の準拠法によって保護されています。 なお、「EULA」の適用を受けない本機用に作成したソフトウェアコンポーネンツは、ソースコード提供の対象とはなりませんのでご了承ください。 ご購入いただいた本製品は、製品として、弊社所定の保証をいたします。 ただし、「EULA」に基づいて配布されるソフトウェアコンポーネントには、著作権者または弊社を含む第三者の保証がないことを前提に、お客様がご自身でご利用になられることが認められるものがあります。この場合、当該ソフトウェアコンポーネントは無償でお客様に使用許諾されますので、適用法令の範囲内で、当該ソフトウェアコンポーネントの保証は一切ありません。著作権やその他の第三者の権利等については、一切の保証がなく、"as is"(現状)の状態で、かつ、明示か黙示であるかを問わず一切の保証をつけないで、当該ソフトウェアコンポーネントが提供されます。ここでいう保証とは、市場性や特定目的適合性についての黙示の保証も含まれますが、それに限定されるものではありません。当該ソフトウェアコンポーネントの品質や性能に関するすべてのリスクはお客様が負うものとします。また、当該ソフトウェアコンポーネントに欠陥があるとわかった場合、それに伴う一切の派生費用や修理・訂正に要する費用は、アイ・オー・データ機器は一切の責任を負いません。適用法令の定め、または書面による合意がある場合を除き、著作権者や上記許諾を受けて当該ソフトウェアコンポーネントの変更・再配布を為し得る者は、当該ソフトウェアコンポーネントを使用したこと、または使用できないことに起因する一切の損害についてなんらの責任も負いません。著作権者や第三者が、そのような損害の発生する可能性について知らされていた場合でも同様です。なお、ここでいう損害には、通常損害、特別損害、偶発損害、間接損害が含まれます。(データの消失、またはその正確さの喪失、お客様や第三者が被った損失、他のソフトウェアとのインターフェイスの不適合化等も含まれますが、これに限定されるものではありません。)当該ソフトウェアコンポーネンツの使用条件や遵守いただかなければならない事項等の詳細は、各「EULA」をお読みください。

本製品で使われるフリーソフトウェアコンポーネントに関するエンドユーザーライセンスアグリーメント 原文

本製品に組み込まれた「EULA」の対象となるソフトウェアコンポーネントは、上記のとおりです。これらソフトウェアコンポーネントをお客様自身でご利用いただく場合は、対応する「EULA」をよく読んでから、ご利用くださるようお願いいたします。なお、各「EULA」はアイ・オー・データ機器以外の第三者による規定であるため、原文を記載します。

• Reverse engineering, disassembling, decompiling, dismantling, or otherwise attempting to analyze or modify the software included in this product is prohibited.

Exhibit A

GPL

GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the program's name and a brief idea of what it does.> Copyright (C) <year> <name of author> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.

Exhibit B

LGPL

GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the library's name and a brief idea of what it does.> Copyright (C) <year> <name of author> This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice That's all there is to it!

Exhibit C

Oniguruma

Oniguruma LICENSE ----------------- /*- * Copyright (c) 2002-2007 K.Kosako <sndgk393 AT ybb DOT ne DOT jp> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */

OpenSSL

LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License --------------- /* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ Original SSLeay License ----------------------- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */

Exhibit D

MPL

MOZILLA PUBLIC LICENSE Version 1.1 --------------- 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof. 1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data. 1.5. "Executable" means Covered Code in any form other than Source Code. 1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A. 1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the terms of this License. 1.8. "License" means this document. 1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is: A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications. B. Any new file that contains any part of the Original Code or previous Modifications. 1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under this License is not already Covered Code governed by this License. 1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor. 1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge. 1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1. For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity. 2. Source Code License. 2.1. The Initial Developer Grant. The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims: (a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications, and/or as part of a Larger Work; and (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the combination of the Original Code with other software or devices. 2.2. Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license (a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and (b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination). (c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of the Covered Code. (d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor. 3. Distribution Obligations. 3.1. Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder. However, You may include an additional document offering the additional rights described in Section 3.5. 3.2. Availability of Source Code. Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular Modification has been made available to such recipients. You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party. 3.3. Description of Modifications. You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code. 3.4. Intellectual Property Matters (a) Third Party Claims. If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained. (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License. 3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer. 3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer. 3.7. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code. 4. Inability to Comply Due to Statute or Regulation. If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. Versions of the License. 6.1. New Versions. Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number. 6.2. Effect of New Versions. Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License. 6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.) 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive. 8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as "Participant") alleging that: (a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above. (b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that Participant. 8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS. This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. RESPONSIBILITY FOR CLAIMS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A. EXHIBIT A -Mozilla Public License. ``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. The Initial Developer of the Original Code is ________________________. Portions created by ______________________ are Copyright (C) ______ _______________________. All Rights Reserved. Contributor(s): ______________________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] License." [NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.]

Exhibit E

MIT

The MIT License (MIT) Copyright (c) <year> <copyright holders> Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

libxml2

Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files, which are covered by a similar licence but with different Copyright notices) all the files are: Copyright (C) 1998-2012 Daniel Veillard. All Rights Reserved.

expat

Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.

Jansson

Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>

curl

COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2013, Daniel Stenberg, <daniel@haxx.se>. All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

node.js

Node's license follows: ==== Copyright Joyent, Inc. and other Node contributors. All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ==== This license applies to all parts of Node that are not externally maintained libraries. The externally maintained libraries used by Node are: - V8, located at deps/v8. V8's license follows: """ This license applies to all parts of V8 that are not externally maintained libraries. The externally maintained libraries used by V8 are: - PCRE test suite, located in test/mjsunit/third_party/regexp-pcre.js. This is based on the test suite from PCRE-7.3, which is copyrighted by the University of Cambridge and Google, Inc. The copyright notice and license are embedded in regexp-pcre.js. - Layout tests, located in test/mjsunit/third_party. These are based on layout tests from webkit.org which are copyrighted by Apple Computer, Inc. and released under a 3-clause BSD license. - Strongtalk assembler, the basis of the files assembler-arm-inl.h, assembler-arm.cc, assembler-arm.h, assembler-ia32-inl.h, assembler-ia32.cc, assembler-ia32.h, assembler-x64-inl.h, assembler-x64.cc, assembler-x64.h, assembler-mips-inl.h, assembler-mips.cc, assembler-mips.h, assembler.cc and assembler.h. This code is copyrighted by Sun Microsystems Inc. and released under a 3-clause BSD license. - Valgrind client API header, located at third_party/valgrind/valgrind.h This is release under the BSD license. These libraries have their own licenses; we recommend you read them, as their terms may differ from the terms below. Copyright 2006-2012, the V8 project authors. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Google Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. """ - C-Ares, an asynchronous DNS client, located at deps/cares. C-Ares license follows: """ /* Copyright 1998 by the Massachusetts Institute of Technology. * * Permission to use, copy, modify, and distribute this * software and its documentation for any purpose and without * fee is hereby granted, provided that the above copyright * notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting * documentation, and that the name of M.I.T. not be used in * advertising or publicity pertaining to distribution of the * software without specific, written prior permission. * M.I.T. makes no representations about the suitability of * this software for any purpose. It is provided "as is" * without express or implied warranty. """ - OpenSSL located at deps/openssl. OpenSSL is cryptographic software written by Eric Young (eay@cryptsoft.com) to provide SSL/TLS encryption. OpenSSL's license follows: """ /* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ """ - HTTP Parser, located at deps/http_parser. HTTP Parser's license follows: """ http_parser.c is based on src/http/ngx_http_parse.c from NGINX copyright Igor Sysoev. Additional changes are licensed under the same terms as NGINX and copyright Joyent, Inc. and other Node contributors. All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. """ - Closure Linter is located at tools/closure_linter. Closure's license follows: """ # Copyright (c) 2007, Google Inc. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are # met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above # copyright notice, this list of conditions and the following disclaimer # in the documentation and/or other materials provided with the # distribution. # * Neither the name of Google Inc. nor the names of its # contributors may be used to endorse or promote products derived from # this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. """ - tools/cpplint.py is a C++ linter. Its license follows: """ # Copyright (c) 2009 Google Inc. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are # met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above # copyright notice, this list of conditions and the following disclaimer # in the documentation and/or other materials provided with the # distribution. # * Neither the name of Google Inc. nor the names of its # contributors may be used to endorse or promote products derived from # this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. """ - lib/punycode.js is copyright 2011 Mathias Bynens <http://mathiasbynens.be/> and released under the MIT license. """ * Punycode.js <http://mths.be/punycode> * Copyright 2011 Mathias Bynens <http://mathiasbynens.be/> * Available under MIT license <http://mths.be/mit> """ - tools/gyp. GYP is a meta-build system. GYP's license follows: """ Copyright (c) 2009 Google Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Google Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. """ - Zlib at deps/zlib. zlib's license follows: """ /* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.8, April 28th, 2013 Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler jloup@gzip.org madler@alumni.caltech.edu */ """ - npm is a package manager program located at deps/npm. npm's license follows: """ Copyright (c) Isaac Z. Schlueter All rights reserved. npm is released under the Artistic 2.0 License. The text of the License follows: -------- The Artistic License 2.0 Copyright (c) 2000-2006, The Perl Foundation. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble This license establishes the terms under which a given free software Package may be copied, modified, distributed, and/or redistributed. The intent is that the Copyright Holder maintains some artistic control over the development of that Package while still keeping the Package available as open source and free software. You are always permitted to make arrangements wholly outside of this license directly with the Copyright Holder of a given Package. If the terms of this license do not permit the full use that you propose to make of the Package, you should contact the Copyright Holder and seek a different licensing arrangement. Definitions "Copyright Holder" means the individual(s) or organization(s) named in the copyright notice for the entire Package. "Contributor" means any party that has contributed code or other material to the Package, in accordance with the Copyright Holder's procedures. "You" and "your" means any person who would like to copy, distribute, or modify the Package. "Package" means the collection of files distributed by the Copyright Holder, and derivatives of that collection and/or of those files. A given Package may consist of either the Standard Version, or a Modified Version. "Distribute" means providing a copy of the Package or making it accessible to anyone else, or in the case of a company or organization, to others outside of your company or organization. "Distributor Fee" means any fee that you charge for Distributing this Package or providing support for this Package to another party. It does not mean licensing fees. "Standard Version" refers to the Package if it has not been modified, or has been modified only in ways explicitly requested by the Copyright Holder. "Modified Version" means the Package, if it has been changed, and such changes were not explicitly requested by the Copyright Holder. "Original License" means this Artistic License as Distributed with the Standard Version of the Package, in its current version or as it may be modified by The Perl Foundation in the future. "Source" form means the source code, documentation source, and configuration files for the Package. "Compiled" form means the compiled bytecode, object code, binary, or any other form resulting from mechanical transformation or translation of the Source form. Permission for Use and Modification Without Distribution (1) You are permitted to use the Standard Version and create and use Modified Versions for any purpose without restriction, provided that you do not Distribute the Modified Version. Permissions for Redistribution of the Standard Version (2) You may Distribute verbatim copies of the Source form of the Standard Version of this Package in any medium without restriction, either gratis or for a Distributor Fee, provided that you duplicate all of the original copyright notices and associated disclaimers. At your discretion, such verbatim copies may or may not include a Compiled form of the Package. (3) You may apply any bug fixes, portability changes, and other modifications made available from the Copyright Holder. The resulting Package will still be considered the Standard Version, and as such will be subject to the Original License. Distribution of Modified Versions of the Package as Source (4) You may Distribute your Modified Version as Source (either gratis or for a Distributor Fee, and with or without a Compiled form of the Modified Version) provided that you clearly document how it differs from the Standard Version, including, but not limited to, documenting any non-standard features, executables, or modules, and provided that you do at least ONE of the following: (a) make the Modified Version available to the Copyright Holder of the Standard Version, under the Original License, so that the Copyright Holder may include your modifications in the Standard Version. (b) ensure that installation of your Modified Version does not prevent the user installing or running the Standard Version. In addition, the Modified Version must bear a name that is different from the name of the Standard Version. (c) allow anyone who receives a copy of the Modified Version to make the Source form of the Modified Version available to others under (i) the Original License or (ii) a license that permits the licensee to freely copy, modify and redistribute the Modified Version using the same licensing terms that apply to the copy that the licensee received, and requires that the Source form of the Modified Version, and of any works derived from it, be made freely available in that license fees are prohibited but Distributor Fees are allowed. Distribution of Compiled Forms of the Standard Version or Modified Versions without the Source (5) You may Distribute Compiled forms of the Standard Version without the Source, provided that you include complete instructions on how to get the Source of the Standard Version. Such instructions must be valid at the time of your distribution. If these instructions, at any time while you are carrying out such distribution, become invalid, you must provide new instructions on demand or cease further distribution. If you provide valid instructions or cease distribution within thirty days after you become aware that the instructions are invalid, then you do not forfeit any of your rights under this license. (6) You may Distribute a Modified Version in Compiled form without the Source, provided that you comply with Section 4 with respect to the Source of the Modified Version. Aggregating or Linking the Package (7) You may aggregate the Package (either the Standard Version or Modified Version) with other packages and Distribute the resulting aggregation provided that you do not charge a licensing fee for the Package. Distributor Fees are permitted, and licensing fees for other components in the aggregation are permitted. The terms of this license apply to the use and Distribution of the Standard or Modified Versions as included in the aggregation. (8) You are permitted to link Modified and Standard Versions with other works, to embed the Package in a larger work of your own, or to build stand-alone binary or bytecode versions of applications that include the Package, and Distribute the result without restriction, provided the result does not expose a direct interface to the Package. Items That are Not Considered Part of a Modified Version (9) Works (including, but not limited to, modules and scripts) that merely extend or make use of the Package, do not, by themselves, cause the Package to be a Modified Version. In addition, such works are not considered parts of the Package itself, and are not subject to the terms of this license. General Provisions (10) Any use, modification, and distribution of the Standard or Modified Versions is governed by this Artistic License. By using, modifying or distributing the Package, you accept this license. Do not use, modify, or distribute the Package, if you do not accept this license. (11) If your Modified Version has been derived from a Modified Version made by someone other than you, you are nevertheless required to ensure that your Modified Version complies with the requirements of this license. (12) This license does not grant you the right to use any trademark, service mark, tradename, or logo of the Copyright Holder. (13) This license includes the non-exclusive, worldwide, free-of-charge patent license to make, have made, use, offer to sell, sell, import and otherwise transfer the Package with respect to any patent claims licensable by the Copyright Holder that are necessarily infringed by the Package. If you institute patent litigation (including a cross-claim or counterclaim) against any party alleging that the Package constitutes direct or contributory patent infringement, then this Artistic License to you shall terminate on the date that such litigation is filed. (14) Disclaimer of Warranty: THE PACKAGE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS IS' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED TO THE EXTENT PERMITTED BY YOUR LOCAL LAW. UNLESS REQUIRED BY LAW, NO COPYRIGHT HOLDER OR CONTRIBUTOR WILL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -------- "Node.js" and "node" trademark Joyent, Inc. npm is not officially part of the Node.js project, and is neither owned by nor officially affiliated with Joyent, Inc. Packages published in the npm registry (other than the Software and its included dependencies) are not part of npm itself, are the sole property of their respective maintainers, and are not covered by this license. "npm Logo" created by Mathias Pettersson and Brian Hammond, used with permission. "Gubblebum Blocky" font Copyright (c) by Tjarda Koster, http://jelloween.deviantart.com included for use in the npm website and documentation, used with permission. This program uses several Node modules contained in the node_modules/ subdirectory, according to the terms of their respective licenses. """ - tools/doc/node_modules/marked. Marked is a Markdown parser. Marked's license follows: """ Copyright (c) 2011-2012, Christopher Jeffrey (https://github.com/chjj/) Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. """ - test/gc/node_modules/weak. Node-weak is a node.js addon that provides garbage collector notifications. Node-weak's license follows: """ Copyright (c) 2011, Ben Noordhuis <info@bnoordhuis.nl> Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. """ - src/ngx-queue.h. ngx-queue.h is taken from the nginx source tree. nginx's license follows: """ Copyright (C) 2002-2012 Igor Sysoev Copyright (C) 2011,2012 Nginx, Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. """ - wrk is located at tools/wrk. wrk's license follows: """ Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modified files to carry prominent notices stating that You changed the files; and (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS """

Exhibit F

FreeType

The FreeType Project LICENSE ---------------------------- 2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least. This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are that: o We don't promise that this software works. However, we will be interested in any kind of bug reports. (`as is' distribution) o You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free' usage) o You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you have used the FreeType code. (`credits') We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project. Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text: """ Portions of this software are copyright (C) <year> The FreeType Project (www.freetype.org). All rights reserved. """ Please replace <year> with the value from the FreeType version you actually use. Legal Terms =========== 0. Definitions -------------- Throughout this license, the terms `package', `FreeType Project', and `FreeType archive' refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a program using the FreeType engine'. This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this. The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty -------------- THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT. 2. Redistribution ----------------- This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions: o Redistribution of source code must retain this license file (`FTL.TXT') unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files. o Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn't mandatory. These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising -------------- Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'. As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license. 4. Contacts ----------- There are two mailing lists related to FreeType: o freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven't found anything to help you in the documentation. o freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org

LibJPEG

LEGAL ISSUES ============ In plain English: 1. We don't promise that this software works. (But if you find any bugs, please let us know!) 2. You can use this software for whatever you want. You don't have to pay us. 3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation that you've used the IJG code. In legalese: The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to its quality and accuracy. This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below. Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions: (1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation. (2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG Group". (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software". We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor. ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered by the above copyright and conditions, but instead by the usual distribution terms of the Free Software Foundation; principally, that you must include source code if you redistribute it. (See the file ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part of any program generated from the IJG code, this does not limit you more than the foregoing paragraphs do. The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable. It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG software. (Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode, it is unlikely that very many implementations will support it.) So far as we are aware, there are no patent restrictions on the remaining code. The IJG distribution formerly included code to read and write GIF files. To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF writer has been simplified to produce "uncompressed GIFs". This technique does not use the LZW algorithm; the resulting GIF files are larger than usual, but are readable by all standard GIF decoders. We are required to state that "The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated."

SQLite

SQLite Copyright All of the code and documentation in SQLite has been dedicated to the public domain by the authors. All code authors, and representatives of the companies they work for, have signed affidavits dedicating their contributions to the public domain and originals of those signed affidavits are stored in a firesafe at the main offices of Hwaci. Anyone is free to copy, modify, publish, use, compile, sell, or distribute the original SQLite code, either in source code form or as a compiled binary, for any purpose, commercial or non-commercial, and by any means. The previous paragraph applies to the deliverable code and documentation in SQLite - those parts of the SQLite library that you actually bundle and ship with a larger application. Some scripts used as part of the build process (for example the "configure" scripts generated by autoconf) might fall under other open-source licenses. Nothing from these build scripts ever reaches the final deliverable SQLite library, however, and so the licenses associated with those scripts should not be a factor in assessing your rights to copy and use the SQLite library. All of the deliverable code in SQLite has been written from scratch. No code has been taken from other projects or from the open internet. Every line of code can be traced back to its original author, and all of those authors have public domain dedications on file. So the SQLite code base is clean and is uncontaminated with licensed code from other projects. Obtaining An Explicit License To Use SQLite Even though SQLite is in the public domain and does not require a license, some users want to obtain a license anyway. Some reasons for obtaining a license include: You are using SQLite in a jurisdiction that does not recognize the public domain. You are using SQLite in a jurisdiction that does not recognize the right of an author to dedicate their work to the public domain. You want to hold a tangible legal document as evidence that you have the legal right to use and distribute SQLite. Your legal department tells you that you have to purchase a license. If you feel like you really have to purchase a license for SQLite, Hwaci, the company that employs the architect and principal developers of SQLite, will sell you one. Contributed Code In order to keep SQLite completely free and unencumbered by copyright, all new contributors to the SQLite code base are asked to dedicate their contributions to the public domain. If you want to send a patch or enhancement for possible inclusion in the SQLite source tree, please accompany the patch with the following statement: The author or authors of this code dedicate any and all copyright interest in this code to the public domain. We make this dedication for the benefit of the public at large and to the detriment of our heirs and successors. We intend this dedication to be an overt act of relinquishment in perpetuity of all present and future rights to this code under copyright law. We are not able to accept patches or changes to SQLite that are not accompanied by a statement such as the above. In addition, if you make changes or enhancements as an employee, then a simple statement such as the above is insufficient. You must also send by surface mail a copyright release signed by a company officer. A signed original of the copyright release should be mailed to: Hwaci 6200 Maple Cove Lane Charlotte, NC 28269 USA A template copyright release is available in PDF or HTML. You can use this release to make future changes.

zlib

Copyright notice: (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler jloup@gzip.org madler@alumni.caltech.edu

libpng

This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail. COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence. This code is released under the libpng license. libpng versions 1.2.6, August 15, 2004, through 1.4.4, September 23, 2010, are Copyright (c) 2004, 2006-2010 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user. libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. The origin of this source code must not be misrepresented. 2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. 3. This Copyright notice may not be removed or altered from any source or altered source distribution. The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated. A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.webp" and "pngbar.jpg (88x31) and "pngnow.webp" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net September 23, 2010

boost

Boost Software License - Version 1.0 - August 17th, 2003 Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following: The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

本マニュアルを印刷する

本マニュアルをお手元でご覧になるための方法をご案内します。

全ページをプリント全ページプリント(PCのみ)

上のボタンをクリックすると、本マニュアル全体をWebブラウザーのプリント機能で印刷できます。
ただし項目が多いマニュアルはページ数が多くなり、全体の印刷には向きません。
プリントしたいページを開き、そのページだけをWebブラウザーのプリント機能で印刷することをおすすめします。

※ マニュアルの内容量によっては、印刷が始まるまで数分掛かることがあります。

※[全ページプリント]ボタンは、スマホ・タブレットではお使いになれません。

このページはお役に立ちましたか?

03版 © I-O DATA DEVICE, INC.
ページトップ
戻る
ホーム

Android TV OS搭載機器

Android TV OSを搭載しているTVやプロジェクターなどのこと。
本ヘルプでは、Android TV OS搭載のFire TVやChrome Cast with Google TVも同様に「Android TV」と呼んでいます。

Android TV

Android TV OSを搭載しているTVやプロジェクターなどのこと。
本ヘルプでは、Android TV OS搭載のFire TVやChrome Cast with Google TVも同様に「Android TV」と呼んでいます。